Forum Post: error compiling basicWifiapplication in CCS

Hi - I haven't seen this in the other posts:

I get an error compiling the CC3000 BasicWiFiApplication for the MSP430 FRAM Experimenter board in CCS5.

I get the following:

"../lnk_msp430fr5739.cmd", line 162: error: expecting section type (COPY, DSECT, or NOLOAD) instead of "VECT_INIT"

(and 23 more like this).  

Here is the offending lines

RTC : { * ( .int31 ) } > INT31 type = VECT_INIT
 PORT4 : { * ( .int32 ) } > INT32 type = VECT_INIT
 PORT3 : { * ( .int33 ) } > INT33 type = VECT_INIT
 TIMER2_B1 : { * ( .int34 ) } > INT34 type = VECT_INIT
 TIMER2_B0 : { * ( .int35 ) } > INT35 type = VECT_INIT
 PORT2 : { * ( .int36 ) } > INT36 type = VECT_INIT
 TIMER1_B1 : { * ( .int37 ) } > INT37 type = VECT_INIT
 TIMER1_B0 : { * ( .int38 ) } > INT38 type = VECT_INIT
 PORT1 : { * ( .int39 ) } > INT39 type = VECT_INIT
 TIMER1_A1 : { * ( .int40 ) } > INT40 type = VECT_INIT
 TIMER1_A0 : { * ( .int41 ) } > INT41 type = VECT_INIT
 DMA : { * ( .int42 ) } > INT42 type = VECT_INIT
 USCI_A1 : { * ( .int43 ) } > INT43 type = VECT_INIT
 TIMER0_A1 : { * ( .int44 ) } > INT44 type = VECT_INIT
 TIMER0_A0 : { * ( .int45 ) } > INT45 type = VECT_INIT
 ADC10 : { * ( .int46 ) } > INT46 type = VECT_INIT
 USCI_B0 : { * ( .int47 ) } > INT47 type = VECT_INIT
 USCI_A0 : { * ( .int48 ) } > INT48 type = VECT_INIT
 WDT : { * ( .int49 ) } > INT49 type = VECT_INIT
 TIMER0_B1 : { * ( .int50 ) } > INT50 type = VECT_INIT
 TIMER0_B0 : { * ( .int51 ) } > INT51 type = VECT_INIT
 COMP_D : { * ( .int52 ) } > INT52 type = VECT_INIT
 UNMI : { * ( .int53 ) } > INT53 type = VECT_INIT
 SYSNMI : { * ( .int54 ) } > INT54 type = VECT_INIT

Thanks for any pointers

sak