1. Has anybody tested at which rate the pressure sensor (T5400) from Epcos) on the SensorTag can be polled to either iOS or to the PC USB BLE dongle.
I have an application which would reqyre a rate of at least 50 ms. From the hardware specs the pressure sensor can report from 2.5 to 66 ms depending on resolution mode choosen.I am not sure what the BLE can transfer to the receiver and which reolsution mode can be defined in the sensortag.
2. How many SensorTags can report into a single iPhone or BLE dongle at the same time?
Thanks from a BLE newbie