[quote user="Josh Wyatt"]
Roland -
yes, please check your antenna as this command snippet seems correct. You might want to also make sure that you have set the registers up correctly. For the tag flags you have selected here (0x26), then you need to have ISO Control register set for 0x02, i did notice some similar errors when ISO Control register does not match the tag request flags byte...
[/quote]
Hi Josh,
I have the same problem, at first, the trf7960a can't receive any interrupt when use 16-slot inventory, but it's ok when use 1 slot.
I have check the register the ISO control register is 0x02.
your means is that the antenna is the most likely reason, right? if it is, can you give me some document about how to do.
thank you.