Hello all,
Ive been trying to bring up the bluetooth on my Pandaboard without any luck. I dont see it ask for the BTS file at all, here is a sample output:
[ 602.022155] i2c i2c-1: master_xfer[0] W, addr=0x48, len=2 [ 684.377563] hci0 ecca7000 [ 684.377563] (stc): st_register(4) [ 684.381042] (stc): chnl_id list empty :4 (stk) : st_kim_start [ 684.387237] (stk) :ldisc_install = 1(stc): st_tty_open [ 684.397369] (stc): done st_tty_open(stk) :line discipline installed [ 684.397399] (stk) :read_local_version [ 684.397399] <out<01 01 10 00 [ 685.201080] (stk) : waiting for ver info- timed out [ 685.206146] (stk) :kim: failed to read local ver(stk) :download firmware failed [ 685.213958] (stc): st_tty_flush_buffer (stk) :ldisc_install = 0 [ 685.216979] (stc): st_tty_flush_buffer (stc): st_tty_flush_buffer [ 685.217346] (stc): st_tty_close (stk) :ldisc_install = 1 [ 685.221160] (stc): st_tty_close: done (stc): st_tty_open (stc): done st_tty_open [ 685.230621] (stk) :line discipline installed(stk) :read_local_version
In the serial term the error is:
[ 557.362274] Bluetooth: st_register failed -22
Ive tried both baud rate speeds to try and get more information. Any help or clues as to how to proceed would be greatfully appreciated.
Thanks in Advance
Nigel Sollars