Forum Post: UART using DMA stack 1.3
Hi,I got a projet that working fine using UART with DMA on a CC2540, when i recieve datas on Rx, a RX_TIMEOUT event occur when the frame is finished, everything is okay and i'm working on the 1.2 stack...
View ArticleForum Post: RE: Problem with ASK Transmitter.
Which chip are you working with? ASK transmitter is not very describing.
View ArticleForum Post: RE: Patch v 1.10.2, UDP doesn't work
Hi Dmitry,Thanks for help.Regards,Mukunthan Kandasamy
View ArticleForum Post: change tx-power and gain settings while connection is open
Hi,i want to change the RX-gain and the TX-power via HCI_EXT_SetTxPowerCmd and HCI_EXT_SetRxGainCmd while a connection is active.Will that work?Andre
View ArticleForum Post: RE: Frequency compensation in CC1101 and packet miss
Interestingly we find very good offset (value of FREQEST status register) range that is most of the times between +1 and -1. So we are considering that there might be something wrong goes underneath...
View ArticleForum Post: RE: Problem in GAP profile (when connecting ) under Windows 7 and...
Hi Mikael,SSO should be able to help. BTW, what procedure are you following on the Windows side and did you make any significant changes to your code?
View ArticleForum Post: RE: Info about Zstack
Kiran NayakI recommend that you start by looking at online workshop- workshop materials http://tiexpressdsp.com/index.php?title=Low_Power_RF_SolutionsRegards,/TA
View ArticleForum Post: RE: CC3000 in conjunction with Cortex-M3(A2F200-M3)
Hi,But another question; I made the driver you mentioned in your mail compatible with Cortex-M3 SmartFusion but now I am looking for a file containg a main to run this program. the folder you...
View ArticleForum Post: RE: wl1271-SDIO driver in kernel v2.6.35
I found the reason of the bug.In wl1271_probe function on irq requesting (request_irq) is interrupt function wl1271_irq called. wl1271_irq call ieee80211_queue_work, but ieee80211 has not been...
View ArticleForum Post: RE: How can I eliminate CC2540 UART power consumption during...
Thanks, YiKai --It will be awhile before I have a chance to test this, but I'm pretty sure you've put me on the right track. One final point you might be able to clarify: There seems to be absolutely...
View ArticleForum Post: RE: frequency hopping spread spectrum communication systems using...
Noorul, That combination of boards will not work, you need a processor to run the software and on that combination of hardware you will have no processor.I recommend that you use a CC1110 and not a...
View ArticleForum Post: RE: SimpleBLEperipheral crashes if you try to transfer a modified...
Thanks, greenja --I took a closer look at the Data Throughput example, and found I could work around my problem by using a burst of 20-byte packets.The Data Throughput example uses bursts of 3 x 20 --...
View ArticleForum Post: RE: I get FIN/ACK after few min, from cc3000 Msp430fr5749
Hi,Thanks Geet is working well.Maybe do you know what is the MaxValue of Inactivity timer?Thanks,Idan
View ArticleForum Post: RE: NanoStack and NanoRouter on CC430F5137
Hi Nitin,In order to use the Sensinode Nanostack (which is the name of the stack running on CC430 or CC1180) you'll need a Edge Router running Sensinode software NanoRouter. Please take a look at the...
View ArticleForum Post: RE: Bluetooth profiles + HTML5
Leo,The current SDK does not support HFP; however, you can contact StoneStreetOne and they can provide you a package with HFP included.Regarding your second question, it varies quite a lot. But most of...
View ArticleForum Post: RE: CC3000 : Error in loop back MSG (PC-CC300-PC)
I tried the latest patch but it does not help me to resolve the issue which I am facing.Our adapter is still getting reset while doing back to back Tx and Rx operation. PFA code running on adapter for...
View ArticleForum Post: could not receive data through UART
Hi All,I am using zstack-1.4.3-1.2.1 and cc2431 and SRF04EB. i loaded serial app code on to 2 modules running on 2 SRF04EB's.The coordinator is starting a network and router is joining that network....
View ArticleForum Post: RE: Trying to understand Chronos source code for Wireless Update...
Unless you have access to the BSL code, I think you will be unable to change the location. The only possible way would be in your code, write a new address to the FFFE and copy the contents of RAM at...
View ArticleForum Post: RE: setting AD0 as CC8520 analog output slave channel
Hi Belkis,I think you have selected a hardware platform that only allows AD1 to be output. For example on the PurePath Wireless Audio EB the input on the onboard AIC3101 is connected to AD1, and this...
View Article