Forum Post: RE: CC2540 Universal bootloader
Open this project: C:\Texas Instruments\BLE-CC254x-1.2.1 - Copy\Projects\ble\HostTestApp\CC2540\HostTestRelease.eww There is a build target from the drop-down box on the upper left side: CC2540USB-UBL...
View ArticleForum Post: RE: CC2530 RF Core Doubts
Checkout the SimpliciTI stack - you get access to all of the source code, which includes all of the code that works with the RF core.
View ArticleForum Post: RE: how can modify the size of the stack in the iar,chip is cc2530?
The most common cause of this pop-up is when you enable an ISR but forget to make the ISR handler. So as an example of an ISR that the Z-Stack sample applications enable and make a handler, look at the...
View ArticleForum Post: RE: Question on Smart meter design using MSP430
Hi Swetha, There are many demos running on MSP430FR5739+CC3000 but unfortunatelly not one that is specifically for Smart Metering. I know there is a project of "Smart Plug" which is a device recording...
View ArticleForum Post: RE: WL1271 in TI8148
Looks like the patches were removed from the latest October kernel. The 05_04_00_11 kernel from April had mmc 2 patches and wl1271 patches for the EVM. The 05_05_01_04 EZSDK kernel is missing the...
View ArticleForum Post: RE: cc2530 - c# application for UART (COM)
Thanks Igor I used also USB<->RS232 cable and communicated with CS2530 on tera term.
View ArticleForum Post: RE: CC2540 proprietary design - Works with BTool but not with...
wing woo, Android is better on one hand but much worse on the other. The native Android Bluetooth service will discover BLE devices. However, there's no API from Google (as of JB release) for BLE...
View ArticleForum Post: RE: A2DP source disconnected
Hi Vishvesh, If the sink moves out of range or has a sudden battery loss, the intermediate device will detect a loss of link after link supervision timeout. I believe the default is 20 seconds, you...
View ArticleForum Post: RE: close and reopen bluetopia stack for MSP430F5438.
Hello Mikael, You should call BTPS_DeInit after BSC_Shutdown and BTPS_ProcessScheduler before BSC_Initialize. Please let me know if it works after these changes. Best Regards, Stonestreet One.
View ArticleForum Post: RE: connection to smartphone
Hi Jay, The phone probably has an SPP server on a different port than what you are trying to open. The example shows one kit opening a server port on port 1 and the other kit opening that port. In the...
View ArticleForum Post: RE: improve SPP datarate on MSP430 + bluetopia
Hi Mikael, Just a quick check, are you sending data or receiving data? If you are receiving data, are you having problems at 115200 during the 2K file that you attached when you try to send it from the...
View ArticleForum Post: Asking for your advice
Hello I want to understand in concept what is the meaning and the relation ship between the transceivers parameters (e.g. channel spacing, frequency deviation, band width ...) to optimize my design,...
View ArticleForum Post: macScanFailedInProgress() function call
I check this function in mac_scan.c, but didn't find anywhere to call this function, I would like to know when this function will be called, what could cause a scan failure? Thanks Rui
View ArticleForum Post: RE: Murata Module and SCL, SDA and internal EEPROM
Hi Jason, As suggested, were you able to add the pull-up registers in your design? Regards, Abhijit
View ArticleForum Post: RE: SmartRF functionality with CC2544 / CC2543
Eirik, I finally got around to this project, and you were right; PRF.ENDCAUSE was 249 'Modulator underflow observed.' I changed PRF_PKT_CONF from 0x6(SmartRF's value) to 0x0, turning the tone off....
View ArticleForum Post: RE: Switching from ZigBee network to another with Z-Stack?
Thank you Dirty Harry...nice nickname you have ;-) That is true on normal scenario when the end device loose connection to coordinator X. But in my approach the coordinator X is always there i.e. it is...
View ArticleForum Post: RE: Connecting 2 wireless devices using SimpliciTI
Here is the peiece of code which i used to access the structure members from a different file. #include "nwk.h" void CmdAPSPacketResp::updateRFConfigDetails(void) { connInfo_t *rf_config =...
View ArticleForum Post: RE: Bit-rate CC3000 wifi module
Hi, The rate is automatically set according to the RF channel characteristics, if re-transmissions occur, the rate will start dropping. Management frames (beacons, probes) are transmitted at 1 Mbps....
View Article
