Forum Post: RE: Consistent 100ms calls?
Or program yourself a timer if you have experience with timer APIs in CC2530 and so on.
View ArticleForum Post: RE: Bluetooth Beginner: CC2540 Shipping Firmware?
Hi Oleg,I appreciate this information. I will look into the HostTestRelease, and will continue to read up on the Developer's Guide.Many Thanks!,Justin
View ArticleForum Post: RE: WiFi and Bluetooth coexistence
Hi Kazola, thank you for your reply. 802.11 transmitters have generally trasmitted power limited to a value lower than +20 dBm, in order to accomodate for antenna gain (a dipole , for example , has...
View ArticleForum Post: RE: WL12xx WiFi+BT on AM335x - BT Initialization fails
Hi Naveen,We have Android demo setup using the same kernel. BT works fine there.e For Linux BSP, same kernel source is used. Yes. uim is running. I have installed...
View ArticleForum Post: RE: .apk file to support CC3000FRAMEMK-L Out of Box Demos
Hi Chris,I will check with the team and update on this.Regards,Abhijit
View ArticleForum Post: RE: RFID reader with TRF7960 and PIC24FJ128GA010
do you have any logic analyzer or scope shots of the comms between your MCU and the TRF7960?
View ArticleForum Post: RE: CC1101 PKTCTRL0 random TX mode usage
I found "something" it appears infinite packet length mode allows this to work (hmm). Data Whitening appears to XOR the PSRG data with itself and output solid 0'sHope this helps someone else.
View ArticleForum Post: RE: WMBUS N-mode
Yes, the TI stack does include N mode. Stay tuned for an updated Application Note on WMBUS!
View ArticleForum Post: RE: PAN1323 ETU to PAN1326A Transition
Hi,So if you perform a BT Inquiry, does it work? I am trying to make sure that your HW is ok.Miguel
View ArticleForum Post: RE: UUIDs for Service and Characteristic
But can the uuid for services be completely different from the uuid for a characteristic?
View ArticleForum Post: RE: Delayed Transmission with High Slave Latency
Hello Miguel, Please see attached. Other than the delay they seem identical. (Please visit the site to view this file)(Please visit the site to view this file)Thanks,Jackson
View ArticleForum Post: RE: ADC to radio to PC, int (int16) to char (uint8) and back to...
Chad, thanks, very helpful!
View ArticleForum Post: MAC_RADIO_TIMER_TICKS_PER_BACKOFF() and...
Hi , My question is regarding the #defines MAC_RADIO_TIMER_TICKS_PER_BACKOFF() and MAC_BACKOFF_TIMER_DEFAULT_ROLLOVER These are the rollover period defines for 16 bit count and 24 bit overflow...
View ArticleForum Post: RE: CC2540 board thickness effect on antenna
For an existing PCB antenna design should antenna impedance be measured. If needed can antenna shape be adjusted but better is to leave space on PCB for a matching network. It is simpler to adjust...
View ArticleForum Post: BEM Linker script error
I have been porting my code to BLE-STACK 1.3. As part of that process I want to move to using BEM for signed OAD. When compiling the version included with 1.3 I am seeing a link error trying to compile...
View ArticleClik here to view.
Forum Post: RE: TRF7970A Rx input sensitivity for an Initiator signal?
Josh Wyatt,Do you know the answer to this question? I also sent scope plots directly to Colin Callaghan at TI on 11/18/2012 with no answer to date. The email, scope plots and description are pasted...
View ArticleForum Post: RE: CC2510 RF modulation
You want to transmit carrier only. Use SmartRF Studio. Select "Continuous TX" tab. Tick off "Unmodulated". When you now start TX you will transmit carrier only (no modulation)
View ArticleForum Post: RE: router problrm?
hi i found the PAN ID have changed when the coordinator re-start. but i have set the PAN ID with the value 0x010A,and the coordiantor re-start the value is 0x010B,what is wrong?
View ArticleForum Post: RE: Where I can get a clear SCH of TRF7970A EVM
Wyatt ,thanks.It 's do helpfull...
View ArticleForum Post: RE: why CC2530 consumption is so large when join the network?
hi I guess the End device is in RX mode when joining the network, am i right? I refer the datasheet,the CC2530 current consumption is about 30mA in the RX mode?can somebody give me some advice about...
View Article