Forum Post: RE: I not have uim-sysfs source who can give me the source please
Hi Micheal,Does the above post answer your question?Regards,Abhijit
View ArticleForum Post: RE: WL12xx is not getting initialized....
Hi Pavan,There should not be any other setting required as suchCan you share your board file?Regards,Abhijit
View ArticleForum Post: RE: Rerouting not working properly
Hello, I reproduced the problem on TI hardware using the CC2530ZNP mini-kit hardware, using the mini-kit firmware.I used the Basic Comms - Router firmware for the routers unmodified with the...
View ArticleForum Post: RE: 2.4G Meandering F Ant Differences
Hi Bryan,I wasn't proposing a whip antenna but yes a chip antenna is what I meant for you guys. Also, yes you need a network analyzer to work with 2.4 GHz wireless devices otherwise you're in the dark...
View ArticleForum Post: RE: wl12xx : ping to wlan0(Station) doesn't work after creating...
Hi Girish,We'll look at this and get back to you.Regards,Abhijit
View ArticleForum Post: RE: Linux kernel driver for LSR TiWi-ble / WL1271L Bluetooth LE...
Hi,The version requested are not supported with official SDK release.The most updated release WiLink(TM) Driver Components...
View ArticleForum Post: RE: Wilink8 (Com8 module) for AM335x
David,There have been some updates to our plans since my last post, we plan to have these markets & software broadly available for evaluation and production starting in 2Q, 2012.In the meantime,...
View ArticleForum Post: RE: Simpliciti Data Loss
Hi,I flashed it with the right sniffer firmware and I can actually see the packets with no problem what so ever. I see the 3 consecutive packets arriving as expected. I am using the code that came with...
View ArticleForum Post: PAN1720 BT module
Hi,I'm hoping someone can answer some (maybe all) of the questions below? This is for my customer so any help would be appreciated - I know some of these are module specific but some are based on the...
View ArticleForum Post: RE: Adaptive Frequency Hopping in Bluetooth Module
Thanks Miguel,We are experimenting with the Classification setting and hope to implement. But just to confirm, the WLAN device is dropping in throughput due to the BT hopping/transmitting on channels...
View ArticleForum Post: RE: Bluetooth testing
Hi Tim,I do not think we have this information.You can use the command "HCI_Read_Local_Version_Information" to get the manufacture ID (TI in this case) which is documented in the Bluetooth specs.
View ArticleForum Post: RE: TRF7960A vs TRF7970
Thank you, you are right that was the problem.I have one more question, about the I.S.O.18092 (N.F.C.P.I.-1).How should I use the Perform response RF Collision Avoidance (n = 0) command(0x06), I mean,...
View ArticleForum Post: RE: Test your HW or TI kit to verify that Samsung Galaxy S3...
Just a little fun test with my Samsung S3 phone again to see that Android and Bluetooth Smart works....Even still with no Android common Bluetooth Smart API, it still works. I am able to play with my...
View ArticleForum Post: RE: Device CC2530 Mini ZNP Kit is not responding
Also, try running the "Hello World" example - it's in the zip file of examples. You can also try the "Button blink" example too to verify basic functionality. Make sure that in IAR Project Options that...
View ArticleForum Post: Simplify SPP Demo for sensors
Hello,I would like to develop a wireless sensor based on the CC256X SPP demo. However, in the demo, we need to use a terminal to configure the Bluetooth module (such as mode selection, open server and...
View ArticleForum Post: RE: TIMAC gets stuck in "MAC_BAD_STATE"
Take a look at this thread:MAC Scan Request yields Bad State statusLPRF Rocks the World
View ArticleForum Post: RE: CCS and Bluetopia
Actually, I believe you can find some code from our Stellaris platform...
View ArticleForum Post: RE: Where are Z-Stack 2.5.1 ZNP precompiled hex files?
Hello,ZAP has the precompiled hex files for the main pinouts, but not for the mini-kit. The following files are included in ZAP (from the readme): I tried the second one (it didn't work) and remembered...
View ArticleForum Post: RE: need explanation For #define DEF_NWK_RADIUS ( 2 *...
Hello,This defines the following: specifies the number of hops allowed delivering the messageLPRF Rocks the World
View ArticleForum Post: RE: wireless programming in ZigBee
In a very dense environment like that you may have some issues, as everyone can hear everyone else. If you don't need meshing, why use Zigbee? Why not use a point to point link?--Derek
View Article
