Forum Post: RE: CC3000 Device not responding after first...
Beatrice Fankem, Thanks for the information and link.I got access to LogicAnalyzer last week and figured out that the problem was with the CS not being in de-asserted state when Power Enable is taken...
View ArticleForum Post: RE: cc3000 blocks in hci_event_handler in simpleLink_init_start
Hello, What is the Power Enable pin status during this capture??I too faced lot of problems like this. But finally figured the problem was with CS line not being in de-asserted state when the Power...
View ArticleForum Post: RE: IEEE address of all devices
Hi M10... YiKai Chen repliedto asimilardoubts (http://e2e.ti.com/support/low_power_rf/f/158/p/237640/833143.aspx#833143) The ZDO_ParseDeviceAnnce( inMsg, &msg); " gives you:msg.capabilities is a...
View ArticleForum Post: CC1101 noise figure
Hello, We are investigating about CC1101 noise figure , because we want to optimize a design. The case considered was : 868 MHz, 38.4 kbps GFSK, 20 kHz deviation , 100 kHz RX filter; sensitivity : -102...
View ArticleForum Post: Z-Stack Lighting temporarily unavailable
Hi ZigBee Light Link fans,You may have noticed that Z-Stack Lighting 1.0.0 was recently taken off-line. We are working on a couple of enhancements for more advanced interoperability. ZLL key features...
View ArticleForum Post: ACK timeout delay for the wl1271/wl1273
Is it possible to change the WiFi delay for an ACK timeout on the wl1271/wl1273 ? I see that iw provides an option to configure the distance between the AP and the STA (so changing the ACK delay) but...
View ArticleForum Post: Stonestreet One SPP Demos
Hello,Is there an SPP Demo for SS1 Bluetopia that is set up as a basic server and does not require multiple TI Experimenter Boards? I have a device that I would like to pair with my computer over SPP...
View ArticleForum Post: RE: Implementing the BT HID Profile on MSP430 with CC256x
Zahid,Thanks for your very valuable input here, and I appriciate you correcting me! Would you be able to elaborate on the memory size requirements? It's looking like flash/ram will be the biggest...
View ArticleForum Post: CC2550 and SimpliciTI compliance?
Hi all,I used to work with CC2500 for developing SimpliciTI application. I realize that CC2550 is a newer version of CC2500 (I guess), but first, I still don't really get what is better?Secondly, I am...
View ArticleForum Post: RE: 6LOWPAN with CC112x ?
Hello,Great you like the CC112x device! You are correct in that we currently do not support 6LoWPAN running on (or using) CC112x, but we plan to. We are working with the Thingsquare team to be able to...
View ArticleForum Post: More Documentation Required?
Hi all,TiWi-SL.I've read the porting guide, the host programming guide and downloaded all the sample projects, is there a guide that shows how to interface with the Host without having to reverse...
View ArticleForum Post: RE: Using the TMS37157 at 2m range
You'd have better luck with a HF or UHF approach (13.56, 433 MHz) and going active, especially since it sounds like you are gunning beyond even a couple meters. To get the most range out of your LF...
View ArticleForum Post: ez430-RF256X to CC2541 SensorTag
Hi, I've got an eZ430-RF256x evaluation tool and a CC2541 Sensor Tag development Kit, is it possible to read the data from the sensorTag using the RF256x USB Stick?Regards,Ignacio
View ArticleForum Post: RE: CC1101 noise figure
yes, we are limited by the need of handling sleeping devices
View ArticleForum Post: RE: sCB doesn't work in ED (ez430-RF2500)
I've enabled the sPeerframe variable manually, forcing sPeerframe=1 but the ED still doesn't receive anything. SO, I thing the problem is not the sCB function. The ED seems to be asleep, but I've...
View ArticleForum Post: RE: Basic Wi-Fi Application Not Working
"Silly" are the kind of answers I'm looking for. That's probably going to be the best word to describe what I'm doing wrong.Once I noticed that my code was paused after clicking debug, yes I did click...
View ArticleForum Post: RE: Problems with SensorTag
Hi Sign Bit,[quote user="Sign Bit"]What is your experience with the 'shelf-life' of the sensor tag?[/quote]I've had my "golden" SensorTag for a couple of months now, using it now and then for short...
View ArticleForum Post: RE: few questions wrt to stack
Hi Nagaraj,You have some good examples in the simpleBLEPeripheral example project.[quote user="nagaraj hegde"]whether there was a loss of connection in case if that happens [/quote]Have a look at...
View ArticleForum Post: RE: BLE with unique ID
Hi,There are a couple of ways depending on how and when you need the device address:1) Within the Peripheral Devices, you can use API GAPRole_GetParameter(GAPROLE_BD_ADDR, ownAddress);2) Read the...
View ArticleForum Post: cc3000 patch programmer problem
Hello!I ported the host-driver (SP1.7) for the CC3000 module on the microcontroller LPC1765.I try to burn SP1.10 and have problem with patch programmer 1.10.Programm Patch Programmer IAR_DR_Patch stuck...
View Article