Forum Post: SensorTag characteristic read problem
hi,i am establishing link between CC2540 USB dongle and SensorTag using BTool.when i perform "read using characteristic UUID" to read IR temperature , humidity or other sensor parameter i am getting...
View ArticleForum Post: RE: Is there is any way to validate the memory leaking in CC2541...
Well, first of all, if you are utilizing BLE stack, search for halAssertHandler function in the code and seta breakpoint on either HAL_SYSTEM_RESET(), halAssertHazardLights(), or while(1)... depends...
View ArticleForum Post: RE: cc1101 availability as bare die?
We do not provide CC1101 as die, only packaged devices.
View ArticleForum Post: RE: iOS6 BLE Issue
Sorry, I must have been mistaken.I have trialled by deleting app and also reinstalling iOS 6.1.1 and the UUID's did in fact stay the same for my peripherals.I don't know what I did when I posted, I...
View ArticleForum Post: CC1110 hang in the middle of operation
I encountered a very weird problem. I mounted 3 PCBs and all of them can be detected and programmed by CC Debugger. I wrote a simple code for LED On/Off control to check if my hardware is correct or...
View ArticleForum Post: RE: CC1101 LQI value range
I have measure maximum value 127 , which correspond to 7bits used from 8. - on CC430RSSI I have from -20 to -40 dBM and average LQI is 50 .. I think is a big number .. (?)
View ArticleForum Post: RE: bluetopia, how to response pin code automatically?
Hello, Thanks for this suggestion. I made the changes told by you and now the pin code gets accepted. But further the required link key does not get stored and PAN1323 does not get paired with the PC....
View ArticleForum Post: Use of encryption and hardware on CC256x and CC254x
On the Bluetooth IC’s (CC256x,4x), is the application able to use the encryption functions and AES hardware to encrypt/decrypt an array?If so, how long does it take? The application needs encryption at...
View ArticleForum Post: Determining scan period and interval settings for CC256x
What percentage BLE scan period and interval can we have in dual mode (CC256x)?Is there any information/data on how the dual mode stacks share time?We have a very low latency requirement where we would...
View ArticleForum Post: Length of time to process BLE advertisements
Need to know how quickly the BLE stack can do the following when another device broadcasts an advertisement: receive it, decrypt some of the data, modify the data and re-encrypt it, transmit it in an...
View ArticleForum Post: Is there a user-less ability to accept pairings?
For a smartphone with classic Bluetooth, is there a way we can have an application connect to dual mode devices (e.g. CC2564) without requiring explicit using interaction for each one? If the...
View ArticleForum Post: RE: WL1271 Vs. CC3000
[quote user="Hossam Alzomor"]The other Question is where I can purchase CC3000 I am looking for it but can't find stock and where I can find full documentation including application notes and...
View ArticleForum Post: RE: Running CC2564 BLE stack on MSP430BT5190
Hey Indraneel,Thanks for the reply. We were finally able to get our PAN1326 working mid last week. Finally figured out that we had HW issues. Thanks for your response.-Raydaniel
View ArticleForum Post: RE: sCB doesn't work in ED (ez430-RF2500)
Hi,If you are using an AP, then in the ED you must use the Join/Link protocol. Just doing a link will not work, as the AP sets up a table structure based on a successful join/link, and will only send...
View ArticleForum Post: RE: CC2530 measure Time of flight
This is very interesting topic, and the only possibility to be close to ToA/F with a IEEE 802.15.4 radio will be to utilize the SFD (Start of Frame Delimiter) signal in hardware with a timer. This can...
View ArticleForum Post: RE: Android and Bluetooth Smart - It works on the Samsung S3 phone
Dear Community,If anyone is interested in working on this, let me know. The first major E2E contributor to contact me will receive a TI CC2540DK, CC2541 Mini DK, and SensorTag kit, so we can get an app...
View ArticleForum Post: RE: MAC_SUCCESS (MAC_MCPS_DATA_CNF) although packet is not...
Yes, acknowledgment is good because it is acknowledges each received packet with respect to the sequence number. Normally, you would not acknowledge broadcast packets. You can use this sequence number...
View ArticleForum Post: Bluetooth programmer for microcontroller
Hi, i want to make a bluetooth circuit to programm a microcontroller.I need to have outputs like MCLR,Data,clk,,vcc,gnd and maybe for lvp a pgm.You suggest to do it with LMX9838 or with cc2560 ??I want...
View ArticleClik here to view.
Forum Post: Problem CC3000 wifi use AP Tenda????Problem
i have an Access point :Tenda ,,,i read and do this user about demo sensor apphttp://processors.wiki.ti.com/index.php/CC3000_Wi-Fi_MSP430_FRAM_Getting_Started_Guide_Using_Smart_Config,,,and run GUI...
View Article