Forum Post: RE: CC-6lowpan-dk-868 Nodeview

Hi,

Note that the default frequency is not 865MHz, but 868.3MHz. The screenshot in the User's Guide is wrong.

Please verify RF configuration used on CC1180DB and Edge Router by:

1) Simply copy the struct you use on CC1180DB and send to me

2) Log in to the Edge Router and do a cat of the rf_configuration_x file like below:

root@da850-omapl138-evm:~/last/configFiles# cat rf_configuration_ttyS1.conf
Interface Id=0
Crystal=26
Data rate=200
Channel spacing=200
Modulation index=10
Base frequency=2188650
TX power=194
RX attenuation=0
Freq. hopping=0
root@da850-omapl138-evm:~/last/configFiles#

Send to me for verification.

Thanks,

Jonas