Hi Gina,
Hi All,
We have custom platform based on OMAP4460.
The WiFi module used is wl1271 jorjin. We have used TQS_S_2.6.ini file to calibrate it.
But during calibration we are getting error.
root@Vega0:~# ./calibrator plt calibrate
[ 8688.601013] wl1271: ERROR command complete timeout
[ 8691.218200] wl1271: ERROR command complete timeout
[ 8693.827575] wl1271: ERROR command complete timeout
[ 8693.838287] wl1271: ERROR firmware boot in PLT mode failed despite 3 retries
Fail to set PLT power mode on
Usage: ./calibrator [options] plt calibrate [<single|dual>]
Do calibrate for single or dual band chip
Options:
--debug enable netlink debugging
root@Vega0:~#
[ 8750.869567] wl1271: ERROR firmware boot in PLT mode failed despite 3 retries
-- Debug: Received Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[HEADER] 16 octets
.nlmsg_len = 68
.nlmsg_type = 2 <ERROR>
.nlmsg_flags = 0 <>
.nlmsg_seq = 1364583621
.nlmsg_pid = 4831
[ERRORMSG] 20 octets
.error = -110 "Connection timed out"
[ORIGINAL MESSAGE] 16 octets
.nlmsg_len = 16
.nlmsg_type = 17 <0x11>
.nlmsg_flags = 5 <REQUEST,ACK>
.nlmsg_seq = 1364583621
.nlmsg_pid = 4831
--------------------------- END NETLINK MESSAGE ---------------------------
Fail to set PLT power mode on
Usage: ./calibrator [options] plt calibrate [<single|dual>]
Do calibrate for single or dual band chip
Regards,
Matadeen