Hi community, i've a problem with binding between two devices trough the coordinator.
I based on the example SampleSwitch (My EndDevice) and SampleLight(Coordinator & Router). The problem is the following, when i've the end device (SampleSw) connected directly with the coordinator, and also the router connected to the coordinator. When i want to bind the end device with the router through the coordinator i've got to do several attempts to perform a correct binding. Although binding packets indicated that the binding was succesfully, i think there is a problem with the routing table because the APS Ack packets of NWK ADDRESS RESPONSE were lost.
I attach a capture of the sniffer showing the two scenarios, the left indicates tha the binding was successful but the end device can't communicate with the router, while the right shows, after several attempts, that the binding was successful and besides the end device is able to comunicate with the router.
This always happens when the end device is connected to the coordinator and the routers (SimpleLight) on the other side. Against this scenario i've to do several attempts to achieve the correct binding.
How can i fix this?
Thanks in advance