Forum Post: Problem in using CC3000 with Cortex-M3(A2F200-M3)
Hi everyone,I want to use CC3000 with Cortex-M3 (A2F200-M3) so I downloaded the drivers related to MP340-FRAM board. I made all parts of these drivers compatible with my CPU. Now I have a problem. I...
View ArticleForum Post: RE: CC8531 Master Providing USB Sourced I2S data to Master Codec...
Hi Kjetil and Patrick,Thanks for your replies.The reason for my interest in CC8531 is, I desire to use the same device and thus pcb layout for two product versions, one with wireless capability and one...
View ArticleForum Post: RE: TMS37157 issues with the Oscillator
Perhaps your antenna resonance is off...try using 2.66mH and 470pF...what you have created is something which is resonant at 152kHz and may have other additional parasitics which is raising the...
View ArticleForum Post: RE: TRF7970 hardware design
the bandgap voltage can be measured at the caps for Pin 11 (the bandgap pin)With the sys_clock pin outputting 6.78MHz - i would think that the BG voltage you will measure will be correct. When you read...
View ArticleForum Post: RE: cc2540 usb dongle is not seen by CC-debugger nor by SmartRF!
Hi Paul,Were you able to get your device to work? If not, I wanted to check that when you hit the reset button that the light is still green. Sometimes the CC-debugger will stay green even though it's...
View ArticleForum Post: Problem with cc2540 usb dongle
Hi,I have recently bought a CC2540DK-MINI and I have tried to follow the basics that is described in the user's guide but when I tried to connect the usb dongle to the pc it don't sees it at all.I have...
View ArticleForum Post: RE: CC2540 Btool
I am having the same problem. Using a SmartRF05 EVB with the CC2540 module. I've compiled and uploaded the "CC2540EM" configuration of the HostTestRelease project. The LCD screen says "TI BLEv1.2...
View ArticleForum Post: READ_NOT_PERMITTED and WRITE_NOT_PERMITTED with Btool
I connected USB dongle and CC2540 to my computer. I established the connection between them by using Btool. However, when I use Btool to read and write something, it always showed the message...
View ArticleForum Post: CC11XX - TX if CCA problem
Hi,One question, it is true that the CC11XX only enters in TX mode if CCA?In my application, it seems not true; sometimes the radio enters in TX but no transmits anything. The problem appears when two...
View ArticleForum Post: RE: HCITester
Sorry, I have another question. Is there an updated HCITester User's Guide? The latest one I found is November 2007. Thanks.Serena
View ArticleForum Post: RE: CC2530 + CC3000 SimpleLink™ Wi-Fi®
Hi Tiago, i'm very interested in your report! Thanks for you contribution.Best regards!Martin Romeromartin77@gmail.com
View ArticleForum Post: RE: CC2540 OAD: size of minimal A-image ?
There is a plan to document this on the following wiki page:http://processors.wiki.ti.com/index.php/OADLPRF Rocks the World
View ArticleForum Post: zigbee Z-stack : missing download links ?
Hi,Where are the links to download z-stack (swrc126.zip for CC2530, ..) ?Regards,Xavier
View ArticleForum Post: RE: cc2540 usb dongle is not seen by CC-debugger nor by SmartRF!
Hi,my apology for the late response, I was traveling.I read the chapter and it did after work after connecting the dongke to the CC-debugger and pressing its reset button which turned the red light...
View ArticleForum Post: RE: Getting Error Code INSTANT_PASSED 0x28 trying to meet the...
BTW, I forgot to mention that you can disable the Channel Map Updates in the meantime.HCI_VS_LE_Write_Channel_Assessment_Mode 0xFDA9, 0x00Rgds,Miguel
View ArticleClik here to view.
Forum Post: Binding Problem
Hi community, i've a problem with binding between two devices trough the coordinator. I based on the example SampleSwitch (My EndDevice) and SampleLight(Coordinator & Router). The problem is the...
View ArticleForum Post: RE: wl1283
Hi Jags,For WiFi and Bluetooth only the firmware used will be different.WL127x will use wl127x-fw* firmware and wl128x will use wl128x-fw* firmware.Regards,Abhijit
View ArticleForum Post: RE: cc2540 keyfob range
This is strange. Sometimes the orientation of the antenna could be such that you have a null point. Can you rotate the antenna 90 degree and see the performance. Also, use fresh coin cells for the...
View ArticleForum Post: RE: When UART enabled, BLE not working on CC2540.
Hi Michael,From what I understand you are saying that GATT_Notification is not returning the SUCCESS status? Or maybe it's indeed returning SUCCESS but you can't send data because the UART is blocked...
View Article