Forum Post: pan1720 clock problem

how to set the clock for 26mhz in pan1721.

i am using pan1720(cc2540) for spi communication through uart0.

i configured PERCFG,P2DIR,P0SEL,P0DIR,U0CSR,U0BAUD,U0GCR as per the ti spi example application(swrc257.zip)

but there is communication between pan1720 and slave device (requires 10mhz clock) (gyro sensor)..

i check with the clk pin and there is no clock from the pin..

i need some suggestions and help from you..