Forum Post: RE: Smart RF Studio has no Sniffer export like the documentation...
Please start a new thread for questions different from the one related to the first one. It increases the probability to get an answer.PA ramping is to decrease the frequency splattering. If you go...
View ArticleForum Post: RE: Send/Receive a zclSampleLight_ManufacturerName (HA profile)
Do you enable ZCL_REPORT on your zclSampleLight project? You should enable it to receive the message as ZCL_CMD_REPORT.
View ArticleForum Post: driver and firmware version
i have wl12xx driver in kernel. i have downloaded firmware wl128x-fw* from https://github.com/TI-OpenLink.How can we know the driver version and firmware version?
View ArticleClik here to view.
Forum Post: Current Consumption CC2540
Hi all, i have a question about the current consumption of the CC2540 SOC. The Datasheet says, that the IC needs 0,4 µA in Deepsleep (PM3). The problem ist, if i use the...
View ArticleForum Post: RE: Alternate between Central and Peripheral roles
I agree, TI did confuse the two. Their MasterSlaveSwitch example project is really about switching between GAP Peripheral and Central roles.
View ArticleForum Post: RE: CC2540 USB Dongle not work with BTool 1.3
usb_cdc_driver_cc2540.infC:\Texas Instruments\BLE-CC254x-1.3.1---> Don"t install this software. Your should check your manufacturer's website for updated driver software for your device.
View ArticleForum Post: RE: Current Consumption CC2540
Glad to hear it, Yes, It's best to run standalone and not in debug mode while you measure the sleep currents.BR. Eirik
View ArticleForum Post: RE: CC2541 receiver
Hello Minh, Please give me the entire code flow from main until you get to the infinite while loop.BR. Eirik
View ArticleForum Post: RE: Open Source Compiler for CC2540
I wish it worked that way with app upgrades!!
View ArticleForum Post: Other possible reasons why the CC1101 might lose PLL Lock
A little background:I have a CC1101 that has been working well. Occasionally though, it would stop receiving, and not reboot until the device was reset. I traced it down to the fact that occasionally,...
View ArticleForum Post: RE: coin cell battery power management problems
Chatto,Thanks for your response. I am working on a project built around the simpleBLEPeripheral sample application, which has the "POWER_SAVING" feature enabled. This feature seems to be putting the...
View ArticleForum Post: RE: Does CC3000 Support QSPI functionality to communicate
Hi Aaron, Thanks for looking into this forum post.I have taken two log file, one with QSPI logic and another one is without QSPI(Regular method of sending one byte at a time in loop as per host...
View ArticleForum Post: RE: Send data to cc2540 from Galaxy S4
How can i start with this ?. I have searched some similar problems in the forum, but was unlucky to find anything.
View ArticleForum Post: RE: CC2531 USB communicaiton
Hi guys! i've trying to enable double-buffering in a project im currently working on and im not eable to do so.... ive changed the usb_cdc_descriptor.s51 in the following way;; Look-up table for double...
View ArticleForum Post: RE: CC3000 HCI Event handler hang
Hi, I am trying to interface STM32F4 series controller with CC3000.I am using MSP430FR5739 basic wifi application example code provided by TI for porting it on STM32.SPI used here is polling mode.my...
View ArticleForum Post: RE: How to implement antenna diversity on CC2530 + IEEE 802.15.4 MAC
Thanks, this is helpful. Two questions:a) why is the RF switch being controlled by the USB pins? Or are they just used as GPIOs in this case?b) how does the software know when to switch antennas?--Derek
View ArticleForum Post: String Characteristics
Hi,I was wondering how I would go about creating a string characteristic and adding a counter value to the string. Would I need to create a second characteristic to go with the first? Or just do an...
View ArticleForum Post: RE: loading the service pack for the CC2560A
Thanks Zahid,We have that command ("hciconfig noscan"). Can you clarify what “other RF activities” includes? We are following the “CC256x Testing Guide” as follows: HCI_VS_DRPb_Tester_Con_TX...
View ArticleForum Post: RE: CC3000 Full SPI Command Set Documentation ?
Hello Yael,I am also trying to find such low level documentation.Example: SPI Command Set and Memory Map of the CC3000. I am also getting frustrated with TI's infrastructure of documents the CC3000 as...
View ArticleForum Post: RE: CC3000 SPI configuration
Brandon, I am also needing low level commands for the SPI bus for configuration and data Tx/Rx. The Wiki pages you reference are incomplete and lack advanced details on the command set and memory space...
View Article
