Forum Post: RE: TAS5086 and 5518
That helps. I am waiting of the schematics from the factory to write the code.
View ArticleForum Post: RE: Communication between CC1125 and CC1101
Please check that you use the same sync word for both chips. The default settings in Studio uses different sync word for the two chips.
View ArticleForum Post: RE: Murata Module and SCL, SDA and internal EEPROM
The i2C lines must have the pull-ups; 2.2k is the value on our ref design, and we suggest you use this value. I'm wondering why you would have difficulty adding two 0402 resistors? The EEPROM is...
View ArticleForum Post: RE: GAVD_Data_Write() is returning a value -65 . what does this...
Hi Vishvesh, I wanted to check if you were able to hear any audio on the sink by sending the GAVD data repeatedly as you were trying earlier, to make sure that the source implementation and the...
View ArticleForum Post: RE: problems with sampleapp and smartrf05 board, router does not...
The antennas should be ok, since the PER test works good for a far distance, How did you see a LQI of zero? the LQI values I see are around 110 for router and 34 for coordinator
View ArticleForum Post: RE: CC3000 FRAM Sensor Application disconnecting
I am using my own access point. I named the SSD TP-LINK_F576EB. Their is no one else on the channel. It does it every time, within the first minute of connecting. I just programmed the 1.7 patch and...
View ArticleForum Post: TI BLE stack: can determine time till next RF event?
I'm working on a BTLE application using cc2540. My application communicates with another mcu via a UART at 115.2 kbps. I have noticed that some system activity is causing bytes to be dropped in the...
View ArticleForum Post: RE: How can I make USB CDC library work with POWER_SAVING option?
I added the battery detect mechanism. In my design our battery charger has indications of the charge. When the battery is detected the usb is enabled and initialized. Unfortunately it still does...
View ArticleForum Post: RE: Help with unknown message
DH, Thanks, I saw that. Thought it might provide some useful information, since I'm seeing it frequently and having to process it during an OAD. -Michael
View ArticleForum Post: RE: Zigbee Stack for CC2531 USB DONGLE
Thanks Igor & DH. As suggested by you. I have gone through the threads & found a link for SerialApp-cc2531.zip posted by DH (...
View ArticleForum Post: RE: Enable BT on DM37xx platform...
Dear Srihari, Please provide details of the Android and kernel version and the DM37x BSP that you are using. Do you see this issue with Bluez or only with the BT stack that you are trying to port?...
View ArticleForum Post: CC1120 vs. CC1101 setting and RSSI
I am trying to set up communication with the following parameters:Data Rate: 76.8 kbpsTX Deviation: 19.3 kHzChannel Spacing: 200 kHzModulation: 2-FSKCarrier frequency: 917.6...
View ArticleForum Post: RE: CC1101 not working? No SPI response
Does nobody have an idea whether the dc offset is correct? I'm still asking myself why I don't get any answer from my chip. I've already soldered a new one on my board but nevertheless there is no SPI...
View ArticleClik here to view.
Forum Post: RE: CC3000 Patch Programmer problems
Here is the picture showing the connectivity of the SDA and SCL. On the right side you can see pin 28 to 36 (SCL) and 29 to 25 (SDA). Murata has reviewed the schematic.
View ArticleForum Post: RE: [WL1271] Android ICS - BT PCM audio to headphones
Hi Francesco, I have the same problem, I want to send pcm data to the wl127x chip under android ICS in order to use sco socket, but I can't find the right PCM device to use. Under /dev/snd/ I found...
View ArticleForum Post: RE: Stonestreet Bluetopia:
Thanks, I have one more query related to HCITRANS layer. I have tried bluetooth communication using the API's of HCITRANS layer but the data is not receiving at another end. Following code is...
View ArticleForum Post: DTIM beacon processing
I have a WL1271 and am using the WLINK6.1.0.0.130 Driver with Firmware version 6.1.0.0.133. I have a number of questions concerning DTIM beacon processing. 1 I have not had success with modifying the...
View ArticleForum Post: RE: GAVD_Data_Write() is returning a value -65 . what does this...
Hello Vishvesh, I checked with TI and they also suggested using PAN131x module for this application. You can get it online. I would recommend moving forward with that module so that you can concentrate...
View ArticleForum Post: RE: Several questions about security of Z-stack for CC2530
Still waiting for help.
View Article
