Forum Post: CC3000 + MSP430 WebServer and Basic WiFi Sample Applications not...
Hello,I tried running the Basic WiFi Application and the WebServer sample application provided on the Wiki with Code Composer Studio 5 and IAR Embedded Workbench but none of them seem to work. The...
View ArticleForum Post: RE: SPPLEDemo_Lite App On MSP430F5529 Experimenter board USB...
Hi Zahid,1. I did what you said and loading the SPPLEDemo_Lite and setting the jumpers properly, I could see the SPPEMO_Lite using the BLueTerm app on an Android phone. I am also able to debug into the...
View ArticleForum Post: RE: MSP-EXP430F5438 and PAN1323ETU
I am using MSP-EXP430F5438 and want to transfer data through bluetooth using PAN1323ETU. I am using SPPDemo of Bluetopia and I can see all the commands on Tera Term. I have kept PAN1323 in server as...
View ArticleForum Post: RE: CC2540 problem with PWM on Timer4.
I started once again, and now everything is all right.My new code: osal_pwrmgr_device( PWRMGR_ALWAYS_ON ); PERCFG = 0x00; //TIMER4 ALTERNATIVE LOCATION 1 P1DIR |=0x02; // Timer 4...
View ArticleClik here to view.
Forum Post: cc2531 dongle
Can somebody explain me the functions of two buttons on dongle CC2531 I have two dongles- one came with CC2530ZDK and another one with CC2530DK.As written in documentation this dongles are programmed...
View ArticleForum Post: RE: CC2531 - unused USB
Hi All I have try it and it seems OK to replace cc2530 with cc2531. The sleep current is almost the same. Hope it can be stable.
View ArticleForum Post: what is the difference between CC2531EMK and CC2531DK dongles
hI,It looks like that CC2531DK dongle and CC2531EMK dongle are coming with different firmware.As follow from documentation CC25531EMK can be used with Packet Sniffer directly, but CC2531DK should...
View ArticleForum Post: CC2540 Dev Kit central finds Dev kit peripheral but not Keyfob
Hi,I have the full CC2540 dev kit which contains the two dev boards. One is configured as Central and one as Peripheral. The Central finds the Peripheral when scanned.I also have the Mini-DK and have...
View ArticleForum Post: Different Stacks in one mesh
Hi,Can someone please tell me if I can mix ZigBee devices from different manufacturers with different stack in one network.I have an existing product line designed with Ember transceivers and stack and...
View ArticleForum Post: RE: Communicating from one CC3000 to another?
Hi Tomer,Could you please give an estimation of the release of the CC3100. I am really interested in point to point access. Thank you.Regards,Jean
View ArticleForum Post: RE: Why does the TRF7960A EVM turn on with both EN and EN2 pulled...
I asked you to look to Figure 2-4 and confirm the small jumper resistor soldered between pins 3 and 4 of HDR_2 (it's very small, but still recognizable). This is necessary only if you don't have one in...
View ArticleForum Post: cc1120 gpio sync detection latency
HiI would like to know if the gpio output for the sync detection is implemented in hardware or by some embedded processor. I want to use the sync output for a time measurement but for this to be...
View ArticleForum Post: RE: Power drain on CC2540DK Mini with accelerometer and...
Hi Aslak,Just realised, is there any way I can increase the sensitivity of the accelerometer? I see you can modify its range but I'm not sure this is exactly what I want to do.Essentially I tried to...
View ArticleForum Post: RE: CC2540 - USB power supply
Hi Chatto,In my USB implementations the whole chip is powered from USB and the battery is disconnected when USB is connected. The reason for this is the processor has to stay awake to keep the USB...
View ArticleForum Post: CC2540 reboots with intensive UART transaction
Hi,I have a problem with my device and it's really hard to debug. I would like to know if someone had already experience a similar issue.My device use a CC2540. The BLE stack is used only in scan mode,...
View ArticleForum Post: RE: CC2540 mini SDK
Is there any labeling (stickers, board rev) that would tell me if I have an "OLD" or "NEW" revision?Are there any other differences in the kits besides the firmware that we should be aware of? Alot of...
View ArticleForum Post: RE: CC1120 and SimpliciTI
Vasco, We are not going to be adding more features to SimpliciTI, however we will keep supporting it and adding support for newer radios. The beta release that Leo pointed to is the most up to date we...
View Article