Forum Post: RE: TRF7960A vs TRF7970
not sure i am following your question exactly. RE: the collision position register usage...this value is set to zero automatically by the decoder at start of receive. The decoder then counts the...
View ArticleForum Post: RE: Why does the TRF7960A EVM turn on with both EN and EN2 pulled...
- JoshThanks for the answer -but it still doesn't answer the very simple question: What makes the EVM board start-up?Please look at the schmematic of the EVM board and the board itself. EN2 is...
View ArticleForum Post: CC2540 Low-Power RF to USB CDC Serial Port won't install
I try to install the driver software but every time all it says is:'Windows found driver software for your device but encountered an error while attempting to install it.TI CC2540 Low-Power RF to USB...
View ArticleForum Post: WL1271/WG7310
We use the development board is AM37X, use Bluetooth module WG7310 module.Now I have the firmware library TIInit_7.2.31.bts and wl1271bt_enable I also have to do a good job, but why I...
View ArticleForum Post: a host controlled upstream with one PM and two PSs
i am using a CC85xxDK(AIC3101) as a PM and two CC85XXKD-Headsets(AIC3204) as PSs in my microphone application.i have used Purepath Configuration to established an upstream between the PM and PSs.They...
View ArticleForum Post: RE: Radio switch OFF & ON
Hi,1. Zstack will turn on/off radio dynamically according to your application.2. No, it will pollute the radio channel. Why would you do that?3. The receivers of ZC and ZR are always on. If you define...
View ArticleForum Post: RE: cc2541 keyfob reference design
[/quote][quote user="Chatto"]The i2c is available on the test pins.Can you elaborate on all changes from the CC2540 keyfob to the CC2541 keyfob? Is it exactly the same except for the i2c changes? Are...
View ArticleForum Post: RE: Production Test Mode
Thanks for the prompt reply. The TrxEB eval kit comes with two TrxEB boards. Apparently, one board appears to work normally, but the other gives this problem.Details of the board:SmartRF TrxEB Rev...
View ArticleForum Post: RE: Problem with Calibrator Initialization with WL128x card
Thanks for the response.The calibration worked by changing the value of the .board_ref_clock in the wl12xx_platform_data wlan_data __initdata structure.The value was changed to .board_ref_clock =...
View ArticleForum Post: RE: MAC Scan Request yields Bad State status
Hi Rui,In fact, I have not changed the MAC_McpsDataAlloc function. I've just tried to use the function in different ways with the hope that this would help me to get rid of the MAC_BAD_STATE status.At...
View ArticleForum Post: RE: wifi calibration process failed on dm814x com7port
The calibration worked by changing the value of the .board_ref_clock in the wl12xx_platform_data wlan_data __initdata structure.The value was changed to .board_ref_clock = WL12XX_REFCLOCK_26So I guess...
View ArticleForum Post: RE: CC2540 Power Management
And I not using any LCD display in my custom board...I will just advertise my device's MAC ID to other devices such as iphone, Windows 8 supported Bluetooth systems, etc.This is what I basically need...
View ArticleForum Post: Routers cannot join to the ZC?
hi:when i power on a new ZC since the old one broke . i should turn off all routers first . but my ZEDs are all on and cann't reset or turn off manually. so the problem is that when i turn off all...
View ArticleForum Post: RE: Z-Stack-2.4.0 for CC2530 download required
Hi guys,I take these inputs are very valuable feedback; please understand we always suggest our customer to use the latest stack releases because they follow the latest enhancements at profile and...
View ArticleForum Post: How to access bluetooth low energy devices from Windows 7
Microsoft has added support for the bluetooth low energy stack to Windows 8, and they have provided a bunch of API's which seem to enable applications to access bluetooth low energy devices. In...
View ArticleClik here to view.
Forum Post: RE: 2.4G Meandering F Ant Differences
All,The IFA described in in AN043 was analyzed with Sonnet Lite EM software. This SW is provided free of charge from Sonnet. A 3D view of the IFA analyzed is shown below:The predicted S11 response is...
View ArticleForum Post: RE: Production Test Mode
Hi,Managed to re-flash the image using MSP430Flasher. Now the sample link test program is working. Another question, the http://www.ti.com/lit/zip/swrc219 sample project is created with IAR workbench....
View ArticleForum Post: CC1150
hi to all the members, Can i connect ccdebugger directly to CC1150 break out board without using an evaluation board?
View ArticleForum Post: RE: tiwi-sl initialization blocks
Hi Alexader khaustov , how do you solve this problem . i am also have this problem that is why i am asking you. Thanks.
View ArticleForum Post: RE: CC1101 not working? No SPI response
This is probably a little late, but I've found that hand-soldering the CC1110 is practically impossible. I fought a similar problem last year for a week before my machine reflowed boards came in. Of...
View Article