Forum Post: CC2564 Question about reference design Filter Bandwidth
Hi,I noticed that the filter used in the reference design for the CC2564 has a bandwidth of 50MHz and that other filters have bandwidths of 100MHz. I know that Bluetooth operates over 2400MHz to...
View ArticleForum Post: RE: Info regarding CC2538
Jonas,Any idea when Contiki support for the CC2538 will be available? Are we talking weeks, a few months, many months, years?Thanks,Greg
View ArticleForum Post: Dynamic DNS or alternative?
I'd like to use CC3000 in my next design in home appliances which is behind the home wireless router/NAT, but won't always know the IP address of the device. The way I would like the system to work is...
View ArticleForum Post: Program CC3000 EEPROM
I'd like to use CC3000 in my next design in home appliances. The way I would like the system to work is that each device to have its unique host name pre-programmed...
View ArticleForum Post: Wilink7(wl1283) WIFI test equipment(R&S-CMW500) file request
Hi all,We used R&S-CMW500 as WIFI test equipment which request waveform file to test RF performance,Could you give us some suggestion ?the attached file is our test procedure.
View ArticleForum Post: DN041 reference antenna design
Hello,I'm adopting my existing cc2540 design (uses inverted F antenna as per reference design) to fit onto a circular PCB. DN041 provides a half wave dipole antenna design which appears to be...
View ArticleForum Post: RE: Simpliciti Join/Link problem
Further to this, the ED code did not work, as multiple ED's joined to each other when they shouldn't have.I made a conditional compile, so the check is only done for ED's, while the AP is always...
View ArticleForum Post: RE: TRF7960 C-code examples
also make sure jumpers on JP5 are in - otherwise the USB to UART connection is broken.
View ArticleForum Post: RE: ZigBee control and power reading
You need to put CC2530EM on smartRF05EB then use the IO pin on smartRF05EB to do the connection.
View ArticleForum Post: RE: Using the Zigbee wireless sensor monitor with cc2530zdk
Have no idea why TI has this limitation on CC2530 SW developing tool. Maybe you can try to port the IAR project to other developing tool but I have no idea if it will work.
View ArticleForum Post: Need a simple example on how to configure CC2510/CC2511 for RF...
I'm new to the CC2510 and CC2511 uP. I have chossen these parts for our new products, Thus far all I've been able to manage all normal I/O and UART Operations.However the RF Radio communications are...
View ArticleForum Post: RE: Recomendations on plastic enclosure/Antenna performance for...
Jose,You are correct, the antenna on the keyfob is shorter than the one on the USB. This is done specifically to compensate for the resonant frequency shift due to the plastic encapsulation. The length...
View ArticleForum Post: uart signal levels
HIWhat are signal levels of cc2540 UART (rx & tx signal)?Please tell me the signal swing so that i know the compatible device i can interface cc2540emk with.Thanks
View ArticleForum Post: RE: Smart RF Packet sniffer with cc2540 usb dongle: driver problem
sorry Nick..Now its working exactly.... Thanks a lot Nick....
View ArticleClik here to view.
Forum Post: Help User CC3000+MSP430FR5739 sensor application
i used CC3000+MSP430FR5739 connect as tutorials.In Sensor Applications ,i do in help :http://processors.wiki.ti.com/index.php/CC3000_Wi-Fi_MSP430_FRAM_Getting_Started_GuideI have a Wireless Router...
View ArticleForum Post: KEY_EST_INIT Problem
Dear All,I am facing problem while initiating a key est init request from a router to and ESI device.I am using UTIL interface of ZNP specification. KEY_EST_INIT Request from Router to ESI:FE 06 27 80...
View ArticleForum Post: RE: REMOTI's IR Problem
Have you read the "CC2533 RF4CE Development Kit Hardware User’s Guide" (www.ti.com/lit/swru266)? Take a look at chapter 6.1.7. Note the statement about range of the IR transmitter.
View ArticleForum Post: RE: advertising PDUs
Hi Ben,ADV_NONCONN_IND packets are nonconnectable advertisement packets, so essentially broadcast packets. A central device cannot and will not connect to those, so no response at all from central.Best...
View ArticleForum Post: RE: OAD support speedup options for CC2541
Hi Maulik,I think you should be able to get slightly higher throughput to obtain a shorter update cycle but you'll still be stuck with several minutes. I've seen updates of 120kB done in 3-4 minutes....
View Article