Forum Post: OSAL Questions
Situation:The project is SimpleBLEPeripheral derivative, using 1.3 stack and USB-dongle configuration on actual cc2540USB. I setup msg generator that supplies data at given rate. My app reads from...
View ArticleForum Post: Used CC2530EMK boards for sale
Hey everyone, I have about 30 CC2530 EMK boards (http://www.ti.com/tool/cc2530emk) that are lightly used but in great condition. We finished our project with them so now we are looking to sell them...
View ArticleForum Post: RE: Reader for tag RI-INL-W9QM-30
if you are able to drop the read range requirement, then you can easily hit that with TMS3705 IC design or using the MicroReader, either most likely with an antenna somewhere betweem 10cm to 20cm in...
View ArticleForum Post: RE: CC2540 Keyfob to act as a master & usb dongle as a slave(...
My understanding is that the hardware is identical, and only the software configuration matters. Mostly when you call GAP_DeviceInit and you specify the role, whether "CENTRAL" or "PERIPHERAL".
View ArticleForum Post: eZ430-Chronos-433 Extending Range
Hello,I have been testing the eZ430-Chronos-433 and out of the box I only get about 3m range. I'm running a feasibility study on a project where I intend to take the module out of the watch and place...
View ArticleForum Post: Where can I get a wl127x datasheet ?
Hello , I want to write a no OS program to control the TiWi-BLE wifi module in my pandaboard . The TiWi-BLE module uses the wl127x module . could you tell me where can I get a datasheet of wl127x...
View ArticleForum Post: How to enable Wi-Fi Direct on Android 4.2, Pandaboard ES?
Hi,I want to get Wi-Fi Direct on Pandaboard ES.I tried AOSP 4.2 + omap-panda-3.0 kernel and linaro 13.02, but both environment didn't get Wi-Fi Direct.How to do this?Thanks
View ArticleForum Post: Frequency hopping with CC1120 or CC1121
Is it possible to implement simple frequency hopping within the 902-928Mhz range using the CC11220 or CC1121 @125Kbs 4GFSK?
View ArticleForum Post: CC1190 in 433MHz
It is possible to use CC1190 in 433MHz (with diffident passive components)?
View ArticleForum Post: questions about cc2540 connection interval dynamically set
i refer TI CC2540 keyfob demo to implement my anti-lost device project.but as every one know, keyfob demo defaultly use MIN and MAX connection interval as 80 and 800.before connecting with iPhone5,...
View ArticleForum Post: RE: CC1110 tuning
I found the address thanks & now have the 433MHz units back from my client. I will ship these on Marth 4th.I have another issue that the CC1110 example projects will not fit the 8K parts. How can I...
View ArticleForum Post: RE: Application Tips with CC2530/CC2531 and Z-Stack
Hi,I was trying to check out serial app project and packet sniffer dongle cc2351. I used serial app project on cc2350 . cc2350 was sending out packets. I could see the packets using cc2351 dongle with...
View ArticleForum Post: sniffer shows packets but the actual data sent not seen in any of...
Hi,I was trying to check out serial app project on cc2350 and packet sniffer dongle cc2351. I used serial app project on cc2350 . cc2350 was sending out packets. I could see the packets using cc2351...
View ArticleForum Post: RE: problem connecting Zigbee Z-Stack EP to coordinator network
now,i use Serial Boot Loader for CC253x.pdf to make bootloader ,but i find it can't work.If you know why ,please tell me.thanks.
View ArticleForum Post: RE: IAR
I'm using IAR 8.20.1.Overide Default" in Options... -> Debugger -> Setup -> Device Description File is uncheck.And I use CC1110F32.i51 which is in "C:\...\IAR Systems\Embedded Workbench...
View ArticleForum Post: update connection interval from CC2540 side, but fail.
I have been trying to use the L2CAP Connection Parameter to change the Bluetooth 4.0 (BLE stack) Connection Interval in iOS 6.1.x. The 30ms default causes my device to consume too much power. I've...
View ArticleForum Post: RE: cc2541 unresponsive on sleep code
After some digging, found this thread that describes a similar problem with no solution.
View ArticleForum Post: RE: Range optimization
Hi Pawel,Before we do any deep discussion on the different possiblities I would like you to run the same test with an out-of-the box eval kit from TI. Any chance you can remove all the modification you...
View ArticleForum Post: RE: Erroneous RSSI values in SPPDemo Application
Hi Shashank,I have updated the wiki to include this command:http://processors.wiki.ti.com/index.php/CC256x_VS_HCI_Commands#HCI_VS_Read_RSSI_.280xFDFC.29
View Article