Forum Post: CC1200 4-GFSk settings
Hi,We are trying to take advantage of the CC1200's 4-GFSK modulation to send 460 Kbps in ~350 KHz of bandwidth.We've got the CC1200 eval boards and have been experimenting with its 4-GFSk performance....
View ArticleForum Post: RE: 2541 UART with Power Savings Mode
Hello - Thank you for your reply. My apologies...there appears to be another thread of the same topic from my multiple postings. Please use this one here on...
View ArticleForum Post: RE: 2541 UART with Power Savings Mode
Thank you for your responses. My apologies, there seems to be another thread of the same question via my multiple listings. Please refer to the reply ->...
View ArticleForum Post: RE: Help in executing the HCI_Send_Raw_Command on Bluetopia
Hi Zahid,Sorry I am reverting back after long time.Regarding your reply, I do not understand what you mean by "implement own way of sending HCI command" ?Can you please elaborate?So far, I have tried...
View ArticleForum Post: RE: can we use existing TI BLE profiles for other sensors
Hi Prabakaran,I think you could take profit of the SimpleBLEPeripheral project, since it seems you only want to collect the data reported by a sensor :)
View ArticleForum Post: RE: CC2540 Active Mode Current Consumption
Hi RobK!I'm not in front of the datasheet right now, but you can probably extract the info you are after from these two...
View ArticleForum Post: RE: How to implement BLOBs?
Serena,in the other post you ask for the code and then ask where to put it.I've provided the response in the other post.With those instructions, I've been able to read > 120bytes...
View ArticleForum Post: RE: TRF7970A in card emulation mode
Thanks a lot for your help Sir! I am using Samsung google Nexus 4 phone as a reader. Sir I will surely take the logic analyzer shots and I will send it to you. Actually this is the ATQB packet which is...
View ArticleForum Post: P2P between TRF7970 and Broadcom chip (Nexus4, Samsung S4) does...
Hi,My code doesn't work with Android phonw which use Broadcom NFC chip such as Nexus 4, S4.The code work well for phone with NXP NFC chip, such as Nexus S, Galaxy Nexus, Nexus 7, etc. Code is base...
View ArticleForum Post: TI BLE Multitool.
Hi, I recently purchased CC2541DK-MINI kit and I played with a bit with the two apps.· iPhone4SBLEDemo· TI BLE Multitool I haven't found a IOS source code for TI BLE Multitool.Did you...
View ArticleForum Post: RE: Bluetopia HRPDemo and Samsung Galaxy S4 HRP Application...
Jeffery, I am trying to solve this same issue. Just got my S4 yesterday. I've applied to get the BLE SDK from Samsung, but I have not yet been emailed a link. If you send me a link where I can download...
View ArticleForum Post: RE: Zstack for AM335
Hi YiKai, I am using CC2520 with an MSP430. However, I would like to avoid the MSP430 if I can and run the Zstack directly on the AM335. Is that a workable solution?Regards,Richard
View ArticleForum Post: RE: Zstack for AM335
As I know, there is no ZStack on AM335 and TI does not have any plan on it.
View ArticleForum Post: RE: UHF RFID reader with CC1101 and MSP430
Hi everyone,Like Micael, i'm interested in using CC1101 for UHF RFID protocol. Is it possible to do that, and has anybody managed to do that ?Any information will help !Thanks
View ArticleForum Post: RE: TRF7970A in card emulation mode
maybe take another look at the ATQB example (you can click on the image and make it big) we are sending here: 50, 01, 02, 03, 04, 00, 00, 00, 01, 00, 81, D5 (of course preceded by 8F, 91, 3D, 00, C0)
View ArticleForum Post: RE: 2 tx to 1 rx
Hi Boon Nam, Two questions:- Is the receiver a USB device (indicated by the CC8531 above)?- Is each TX sending a stereo signal (indicated by stereo microphones above)?Right now we only supports stereo...
View ArticleClik here to view.
Forum Post: RE: CC8520 RSSI
Hi. 1. Please see your previous post on this topic: http://e2e.ti.com/support/low_power_rf/f/382/p/236822/830693.aspx#8306932. You will read out average RSSI since last time you ran the NWM_GET_STATUS...
View ArticleForum Post: RE: CC8531 : My Microphone project (audio but high precision...
Hi Florian, THis forum section is for the PurePath Wireless devices. For questions on the CC2560, please ask over at the Bluetooth Applications...
View ArticleForum Post: Help with CC2520 + cc2591 PCB design
Hi, My name is Bruno and I am from Argentina, so sorry if my english is bad.I want to design a 2 layer PCB, 1mm thick, FR4 to interface a cc2520 with a cc2591. I have a doubt, can I use descrete L-C...
View ArticleForum Post: RE: CC2543 basic mode operation
Hi Eirik,Success!!I had the order of the radio initializing and radio enable wrong.It works well and I will put new code in carefully as not to break it.Thanks very much for your help &...
View Article