Forum Post: RE: When TI CC3000MOD will be available?
Hello LR, Your right, it seems like it is on backorder. You can still get one on backorder.https://estore.ti.com/CC3000EM-CC3000-Evaluation-Module-P4257C159.aspxI will try to find out more information...
View ArticleForum Post: RE: MSP430FR5969 works with CC3000?
Hello Zhou,We have available the porting guide that gives information on how to port it to the MSP430FR5739 Platform.You can find more information on the MSP-EXP430F438+CC3000...
View ArticleForum Post: New Sensor Application Released
Dear E2E Members,We are happy to announce the release of a new version of the Out of Box Sensor Application. The new version is 1.10 and includes significant fixes and enhancements. We highly recommend...
View ArticleForum Post: RE: Over The Air F/W Download support CC2541 Keyfob
[quote user="Aslak N."]We had to take down the sample application, hopefully temporarily, due to some legal uncertainty regarding distribution of apps outside the app-store.We will add at least the...
View ArticleForum Post: RE: CC-6lowpan-dk-868 Nodeview
Hi, again.First, I sloved that problem, I changed JP2 pin INT to EXT on CC430 board, then download worked. I don't know What do that pin is rule. Could you explain?After all, I tested Edge Router on...
View ArticleForum Post: RE: Problem with than more than one BLE connection with the same...
Any update guys? Is there something I missed?
View ArticleForum Post: Need help in wl12xx
Hi,We are using jorjin module with wl1271. we have ubuntu 12.04 with kernel 3.4.7.firmware loaded for wl12xx is 6.3.5.0.98.We are facing issue with dhclient. it does not get ip for long time after...
View ArticleForum Post: RE: CC2540 - USB power supply
I agree that this is the best way to do it.If you want to go all the way you can use a li-ion coin cell and charge it from the USB supply.Cheers
View ArticleForum Post: RE: CC2540, can i get different duty cycle PWM output on CH0 and...
As stated in chapter 10.5, when the counter (T3CNT) is equal to the compare value (T3CCn) the output toggles. You can have different values for T3CC0 and T3CC1 which will give you different PWM duty...
View ArticleForum Post: RE: DHCP not working with cisco WAG160Nv2
Hi AlonI have tried alot of different stuff (configurations), to figure out what or who causes this error.I actually think that I have found "who's" to blame for the strange behaviour.I thought it was...
View ArticleForum Post: RE: Immediate Disconnect in iOS6
if the device on the other end of the connection is under your control (and a cc2540) you could simply issue GAPRole_TerminateConnection(); on a write to a dedicated characteristics and when the state...
View ArticleForum Post: RE: BLE Peripheral with multiple connections
as far as i know the limits for the cc2540 BLE stack are one active connection for peripherals and three active connections for centrals.see SWRU271A (TI CC2540 Bluetooth Low Energy Software...
View ArticleForum Post: RE: CC2540 daughter boards on Smart RF04EB 1.9
Hi LDT,I tested the a CC2540EM with a SmartRF04EB rev. 1.9 and it was working fine!Cheers,Fredrik
View ArticleForum Post: RE: Question about RF4CE DK
Hi Alexander,1. Yes you can do it. The CC2533 must be programmed as an RNP.2. The schematic for the target board is found here: http://www.ti.com/tool/remoti-refdes.3. The PER Test will only work with...
View ArticleForum Post: RE: WL1271L problem when turning on Bluetooth
Hi, SundeepOK, I will try what you suggestThank you
View ArticleForum Post: OSAL is related to HARDWARE?
Hi all, Since OSAL used to built an application on ZAP(Zigbee application processor) side But if I wanted to use another board instead of MSP430 i.e.example LM3S9D96 .. Can I able to use OSAL library...
View ArticleForum Post: RE: Need help in wl12xx
Hi,With further testing, it is seen that connecting to open wifi network (with security=None) does not have any issues. The board gets the IP address quickly after connecting to the wifi...
View ArticleForum Post: RE: Network Topology - Parent-Child Relationship Lost
Hi,I think that in your case there are no problems with the network.The inherent property of ZigBee network is to route data between a source and a sink automatically. This means the network 'data'...
View ArticleForum Post: RE: CC2540 Programming
No, the TPS62730 is not essential for the CC2540. The CC2540 can run directly from any power source providing between 2.0 V and 3.6 V.The TPS62730 is a 2.1 V buck regulator often used to reduce the...
View ArticleForum Post: RE: Details needed regarding zigbee,TINYOS and supported boards.
The 6LoWPAN stack includes the RF network level (above IEEE 802.15.4) also. Therefore, some kind of RF mesh network can be created.The solution is mainly depends on your needs. As an example you can...
View Article