Forum Post: RE: SmartRF Studio: User interface bug?
Hi,Thanks for the feedback.I fully understand the frustration and will make sure this is fixed in the next release.Regards,Ćyvind
View ArticleForum Post: RE: How to put Z-stack Home automation profile into cc2531emk
Thanks TheDarkSide....It's a good exemple to start....Ā Anyone haveany more suggestions???
View ArticleForum Post: RE: iOS and SimpleBLEPeripheral (CC2540/2541) -...
Hi Michael,You'd think so. However, I don't think there's any determinism in which order advData (one for each found peripheral) and scanRsp (one for each peripheral that answers scanReq) pops through...
View ArticleForum Post: RE: New Sensor Application Released
Hello.Tell me,please, whatfilesmust be usedfor portingto my project: PatchProgrammer.corPatchProgrammer_DR_Patch + PatchProgrammer_FW_Patch?I found thatthe arrayswlan_drv_patch[ ]andfw_patch[ ]are...
View ArticleForum Post: RE: Query in my Design
I am using Panasonic rechargableĀ battery..(Please visit the site to view this file)Do i have any probs with this specific antenna??
View ArticleForum Post: RE: BLE Stack v1.3, Timers, Interrupts and sending data to the...
Hi Ben,The precision is 1ms. The accuracy is perhaps what you were asking about, and that depends on the central device, as every time the peripheral wakes up for a radio event, the system timer is...
View ArticleForum Post: RE: Diversity Antenna Design impact on USB Audio Out
Hi Al,Yes, only protocol masters can be USB devices. This is mainly because of the wireless clock distribution. The USB host (e.g. the PC) is normally clock master, and in the PPW protocol only the...
View ArticleForum Post: RE: SimpliciTI, MSP-EXP43-FR5739 and CC1101 EMK
It appears that the problem starts even before that. For example, I am downloading the "LinkTo" code to my MSP-EXP430FR5739 board when the CC1101 EMK is plugged into it. According to the user's guide,...
View ArticleForum Post: RE: Murata's CC3000 TB current spike issue
Hi Tony,Thanks for the info. I integrated in the design a super cap of 0.35F DMD2W4R2L354M3BTA0 which is shared with a GSM/GPRS module.The MCU voltage is isolated from CC3000. As they won't be...
View ArticleForum Post: RE: Communicating from one CC3000 to another?
Hi Alon,Well WiLink chipset are great, but it is a little bit over fitted for my needs. I am more on the sensor side right now and I am looking for hi-throughput data rates capability.Is there any low...
View ArticleForum Post: How to program the CC2530?
Hello,We have designed a custom board which contains a zigbee processor CC2530, it also contains a MSP430F2274 microcontroller.Now I have to program the two devices, can anyone give me some useful...
View ArticleForum Post: RE: cc2530 - can we limit range of the CC2530 ??
sir sorry for asking this sir ,in my application the coordinator is allowed to transmit data upto 10 meters (MAX). so there is no use of measuring RSSI in end device part ,do we have any variables...
View ArticleForum Post: RE: Packet sniffer
Hi,It is possible to read all the information of psd files since they are binary files. What you should do is using a binary viewer program and read the documentation of both spec and sniffer manual. I...
View ArticleForum Post: RE: CC2541 -BLE 1.3 stack - wrong advertizing time.
Hi Evgeny,You haven't really said what you want to achieve, but 10,000 seconds is almost 3 hours. This is 9,820 seconds more than the allowed maximum value for limited discovery advertisement...
View ArticleForum Post: RE: CC2541 -BLE 1.3 stack - wrong advertizing time.
Hi Evgeny,Yes, the units are a bit confusing, and are different simply because for instance 0.625 mSec is the best precision we can give for some parameters, whereas for instance TGAP_LIM_ADV_TIMEOUT...
View ArticleForum Post: RE: CC2540 connection problem
Hi Steve,We will release (and had released) a sensortag app example, which is similar to the Sensortag app and the Multitool app. However, it is temporarily down while we wrangle with the legal...
View ArticleForum Post: RE: Problem with than more than one BLE connection with the same...
Hi Andrew,I'm also not sure why it was moved. I'll have to move it back, as we don't support 2564 on this sub-forum.I hope you get a resolution to the problem.Best regards,AslakĀ
View ArticleForum Post: RE: Source for Hex CC2540_SmartRF_SimpleBLEPeripheral.hex
Hi Andy,When you have the SimpleBLEPeripheral project open in IAR, you can select the build configuration near the top left of the screen, at the top of the pane called Workspace. There select CC2540...
View ArticleForum Post: RE: cc2540 reading keyfob notification data on pc using dongle
Hi Evgeny,Have a look at ti.com/ble-wiki.Some PC projects there do what you want.Best regards,AslakĀ
View Article