Forum Post: RE: Zigbee Stack Development
Agreed. I did the same thing like John last year. Even using freakz as a reference, I spent 3 month to finish a MAC/NWK/APS proto stack. Never trust your boss when he knows nothing about what a Z-Stack...
View ArticleForum Post: RE: Z-Stack End Device Does Not Sleep While Waiting for an APS Ack?
Do you use example in ZStack 2.5.1a? If yes, which one do you use? By the way, do you define POWER_SAVING in your project for ZED to enter low power mode?
View ArticleForum Post: RE: Can I use SMS notification service in iphone without...
Thank you for replying.Q2. for example iPhone has bluetooth dual stack. METAWATCH also has bluetooth dual stack. when METAWATCH connect iPhone, How do they connect (classic Bluetooth or BLE...
View ArticleForum Post: RE: Fatal error: Failed to identify device .Use SmartRF05EB...
thanks for ur help, this problem has been solved.http://e2e.ti.com/support/low_power_rf/f/538/p/253160/886589.aspx#886589
View ArticleForum Post: RE: CC2540 pcb component
I don't think you need to import the design files. You should be able to simply open the schematic and pcb files in the Cadstar express. I do believe that Cadstar express is limited with regards to...
View ArticleForum Post: 2.4Ghz Wireless UART wire replacement
Hi,Is there any wireless reference design/EVM that can direct replace an UART(RS232) cable between 2 devices?Please advise.Thanks.
View ArticleForum Post: RE: cc3000 patch programmer 1.10 problem
Thanks for the explanation, Abhishek Bhadraja.I determined that it is necessary to establish usPatchesAvailableAtHost = 1 empirically. And it worked.Mukunthan KAndasamy, the sample code you can find on...
View ArticleForum Post: WL1271 - BT FCC testing using WinCE
Hello,How can I control the BT radio in the WL1271 for FCC testing purposes when running WinCE OS?Ticon is working to do what I need with the WiFi radio section of the WL1271 for FCC test purposes. I...
View ArticleForum Post: RE: CC2540 ADC sampling while transmitting
Maybe a TI employee can answer my question ?Yadid
View ArticleClik here to view.
Forum Post: RE: IRQ Line never goes low after initial command
There it is, zoomed out and zoomed in. My logic analyzer doesn't convert to time automatically, so the X-Axis is "Sample Counts" at the sample rate of 10MHz.
View ArticleForum Post: RE: Get a CC2450 USB dongle working with iOS 6.0 simulator
Hi Alessandro,Were you able to solve the problem? I kind of have the same problem. I am using the Cirago device, a Bluetooth LE adapter, which allows me to have the iPhone iOS 6.0 simulator to have the...
View ArticleForum Post: RE: Troubleshooting experience requested on 112x design
PPS: tested TX mode successfully. Both with +80° to -30°, without change of 1Hz of carrier frequency...
View ArticleForum Post: TRF7970evm+MSP430FG4618 in p2p mode
Hi all.I'm doing a final project involving communication between 2 (or more) units, each unit consists of a trf7970aevm connected to an external MSP430FG4618 Experimenter’s Board (bypassing the...
View ArticleForum Post: Access to raw USB stream on cc2540 dongle
I am implementing a simple, low data rate, replacement for a serial connection. I have modified the key-fob firmware to do what I need for the peripheral device. My intention is to modify the...
View ArticleForum Post: cc1120 rssi doubt
In the CC1120 user guide, at page 34 section RSSI, there is a exampleAGC_GAIN_ADJUST.GAIN_ADJUSTMENT = 0x00RSSI[11:0] = 0x200RSSI=32 dBm – 102 dB = –70 dBmtherefore, the formula for RSSI in dbm is...
View ArticleForum Post: using nvram on the CC2540
I am developing code for a Central device using the CC2540. I have a need to store some application data in nv ram. Can someone direct me to the procedure for adding approx. 745 bytes of data to nv...
View ArticleForum Post: RE: CC3000 : Error in loop back MSG (PC-CC300-PC)
Platform detail : Host MCF5253 (FreeScale) ***So if you look into the trace then you can see I am receiving less byte then transmitted but ideally it should be same as per written logic. and when I try...
View ArticleForum Post: RE: Help with cc3000 connecting to wifi
I seemed to have got it working by removing the security from my AP.I normally use WPA on the security of the AP. Do i have to put the password in twice for this? Under password and key?
View ArticleForum Post: WiFi CC300/WL127x Current Consumption
Hello,We want to implement the TI WiFi in our system and power consumption is the major system variable. Some questions:1. Can you guide me to the link or available documentation that quantifies the...
View Article