Forum Post: start smart config function
Hi,I am porting the sample basicWifiapplication code for my application. One question here is what is the use of StartSmartConfig(). Is ist for communicating with mobile phones or to start the wireless...
View ArticleForum Post: RE: CC3000 in conjunction with Cortex-M3(A2F200-M3)
sure.Please download the "basic wifi application" demo for any of the platform (MSP FR5739) for example. In there, you will find the SPI driver (extracted under: \Source\CC3000 Spi).I believe your...
View ArticleForum Post: CC2520 and zstack 2.5.1a
Does anyone know if there is a port for the cc2520 and the msp430EXPF5438A for version 2.5.1a?
View ArticleForum Post: RE: Communication between iPhone4S and SmartRF05
Hi, Does someone provide some advance on this?I have similar problems when using HostTestAll (usb as peripheral + GATT_DB_OFF_CHIP) connecting to an android device (Motorola RAZR)..don'k know how to...
View ArticleForum Post: RE: Maximum number of Slave connection for CC2540 Bluetooth Low...
[quote user="J.Sample"]I think the information for the CC254x in that link is wrong. According to the 1.3 Developer's Guide pg. 12: Currently, the BLE central stack supports up to three simultaneous...
View ArticleForum Post: RE: Enabling POWER_SAVING causes intermittent BT connection fail.
Hello Brian,Still no luck? You have outlined the problem quite clearly now.The one thing I'm not clear on with your running the same code on the Keyfob. Are you running the exact same code that only...
View ArticleForum Post: RE: CC3000:Issue with TCP
Regarding the race condition, could you describe the nature of the fix? I'm assuming the race is when the host is writing to CC3000 and it simultaneously receives radio RX data -- is this correct? To...
View ArticleForum Post: RE: questions about cc2540 connection interval dynamically set
Hi Jun Feng Hu,The following post may help: http://e2e.ti.com/support/low_power_rf/f/538/p/167385/717343.aspxAlthough you seem to be following the guidelines correctly, the high values for min/max...
View ArticleForum Post: RE: CC3000 : Error in loop back MSG (PC-CC300-PC)
Thanks Tomar,I have a few more update on this issue.In current situation I can able to do the communication in one direction without any problem, means at a time if I am doing only one operation then...
View ArticleForum Post: RE: Change BD ADDR CC2560
Hello Ruben,This was tested on Stellaris when the post was written originally.After your comments we now have reproduced your issue on MSP430 and are looking into it.Best Regards,Stonestreet One
View ArticleForum Post: RE: fail to establish connection using socket API
Sorry I didnt close this thread.I got it working now
View ArticleForum Post: HCI_LE_Rand and HCI_LE_Encrypt support in HostTestRelease?
I'm trying to generate some random number using the CC2541 running the HostTestRelease firmware. I am sending HCI_LE_Rand using the HCITester tool but I'm not getting any reply back.I am getting...
View ArticleForum Post: RE: cc2540 chip erase with SmartRFProgConsole.exe
it was pilot error on my end....the 'CE' action works just fine....
View ArticleForum Post: RE: DMA Transfer rate on CC2543,44, 45
Hi Eirik,Thanks for your help. Our application requires reading data in from SPI from one source, writing out through SPI to another destination, and then reading from SPI and transmitting that data...
View ArticleForum Post: RE: set the debug-lock bit only with SmartRFProgConsole.exe
When you run SmartRFProgConsole.exe from the cmd.exe window without putting in any parameters, it will give you a list of all the commands and how they work.A LD(7) 7=None will block debug commands...
View ArticleForum Post: RE: CC1020 PERFORMANCE IN NOISY ENVIRONMENTS
Hi John, There is no fast/definitive answer for this situation, as trying to receive and demodulate a signal in the presence of another interfering signal is difficult, and depends on many things. So...
View ArticleForum Post: RE: CC2510/11 Timer help
O.K. then,The only reasons I can see for such an error is that you have not created a project and do a build. Or you have selected the wrong device. I don't have the SWRU117 example, but I would...
View ArticleClik here to view.
Forum Post: CC2511 on IAR
I just downloaded IAR and tried to run the timer example code from swru117 (software example code).But I get a message when I try to "debug without download". Screen shot attached.
View ArticleForum Post: RE: CC2538 availability
Hello Sverre,When will this be available in the estore or better yet, how can I get one of the RTM boards?Thanks,
View ArticleForum Post: cc8531 Network Status LED GIO12
I'm bringing up a cc8531 board and i'm trying to configure the pin the network status LED is on through the PurePath Wireless cfg utility but there is no grey box in the selection matrix. My only...
View Article