Forum Post: RE: CC2530 + CC3000 SimpleLink™ Wi-Fi®
Tiago, Sounds like a great project, the easiest way to publish your work is to upload your project and documentation to the E2E. A wiki is also a good way.Regards,/TA
View ArticleForum Post: RE: CC2540 "The third-party INF does not contain digital...
I agree that TI should be signing drivers now since that has been a 'requirement' since Vista was released. I just purchased the ez430 Chronos watch and the driver INF, modified April 10, 2013, isn't...
View ArticleForum Post: RE: How to enable Wi-Fi Direct on Android 4.2, Pandaboard ES?
Hi, SamI'm trying both Miracast source and sink on panda, AOSP Android 4.2.Source:try to connect a sink PTV3000, problems occurred.hdcp.so not found on panda. skip this, in next, software encoding...
View ArticleForum Post: RE: problem in connecting CC3000 using WPA2-PSK.
Hi,How do you confirm CC3000 is not connected? According to the application print in the hyper terminal it looks like you are connected and received IP (unsolicited event DHCP received).Also, if your...
View ArticleForum Post: CC2540 Development Kit Pinout
I am trying to do some development using the CC2540 dev kit. The problem is, I cant find a correct listing of ports vs peripherals and pins for the kit.The nearest I can get is trying to reverse...
View ArticleForum Post: Smart RF studio v1.11.10 and CC2538 on smartRf06 EB
Just downloaded new v1.11.10 version of SmartRf Studio, hopping it will allow access to CC2538EM v1.0 I have on smartRf06 EB.It seems like SmartRf Studio does not recognize smartRf06 EB at all. Also, I...
View ArticleForum Post: Disabling individual global interrupt on CC2538 causes to entire...
Just want to understand whether it is intended behavior or bug that may get fixed on the later chip revisions. Disabling individual interrupt from DIS[0..4] resets entire EN[1..4] Interrupts enable...
View ArticleForum Post: RE: Calibrator Segmentation Fault.
The SDK is version am335x-evm-sdk-src-05.07.00.00.tar.gz. I'm cross-compiling with GCC version 4.5.1 20100924. Target host is the am335x evm board with the 3359 chip. Everything seems to compile...
View ArticleForum Post: Antenna - 434 and 868 MHz
Hi!I have a CC1120 DK with the 434 MHz EM. I am wondering if the antenna for the 434 MHz will function with the 868 - 915 MHz EM as well? Since 868 is a multiple of 434 it will work right? Or am I...
View ArticleForum Post: frequency compensation mechanism of CC1120
Hello TI, I have a problem to understand the frequency compensation mechanism of the cc1120. The user guide is not informative at this point.Where does the value of the FREQOFF_EST come from? If I...
View ArticleForum Post: RE: SPP_Set_Configuration_Parameters always fails.
Hi Clive,The following wiki explains how to improve the SPP throughput : http://processors.wiki.ti.com/index.php/CC256x_MSP430_Bluetopia_Basic_SPPDemo_APP_Improving_throughput.Let us know if you have...
View ArticleForum Post: RE: problem in connecting CC3000 using WPA2-PSK.
Hi,I tried your exact code here (same SSID and key as well...) and it works.When applying the SSID length use small and not capital letters: 02eTP-LINK_4C0B54Let me know if this helped, anyway I will...
View ArticleForum Post: Errors in I/O Mapping table of SmartRF Evaluation Board (in Wiki)
Hi,The I/O Mapping table for the SmartRF Evaluation Board that can be found in the Wiki ( http://processors.wiki.ti.com/index.php/BLE_-_FAQ ) contains some errors (I believe). I've made this deduction...
View ArticleForum Post: RE: could not receive data through UART
Which port parameter do you use? HAL_UART_PORT_0 or HAL_UART_PORT_1. Is it matched with your hardware configuration?
View ArticleForum Post: Why isnt my function executed? ( Execution from RAM)
I have a function thats supposed to write to a flash location, so i need to execute it from RAM. But when i step through the program i notice that it skips my function and returns to start.. And when...
View ArticleForum Post: CC2540 Op amp as a load cell signal amplifier
Hi,So I have a load cell and cc2540. I would like to amplify the load cell output signal for 10000 times before I send it to ADC. Up to this point I was using INA125 for that. Now I would like to use...
View ArticleForum Post: RE: CC2540 Development Kit Pinout
Hi Andy,The examples for CC2540/41 use the analog voltage signal from the joystick ("JOY_LEVEL") to read the joystick. I beleive it is connected to P0.6 on the CC2540.If you download the software...
View ArticleForum Post: RE: How to modify SampleLight to send other HomeAutomation command
hi YiKaimy application works good even in cc2531, because i forgot to implement the file fw8zcl.cfg in my file tools.regards
View ArticleForum Post: RE: cc2531 usb dongle
hiyou must just added a composant(sparkfun level converter) to convert your signal to a UART signal.
View ArticleForum Post: Triggering notifications
Hi,I have just one trivial question. Which piece of code is triggering the notifications from acc profile on KeyFobDemo when i tilt the keyfob? Thanks :-)
View Article