Forum Post: TCS1110 and TCS2010 GSM chipset
Dear colleagues,do somebody have experience with the TI GSM chipsets like CTS1110 and CTS2010 ?Regards,Alex
View ArticleForum Post: RE: SPI link from master to slave
Hi Kristoffer,Yes I have a master in left and slave in right speaker. Good to hear no "DC blocking" is planned.Thanks for the inspiration, I will work on making the SPI-in-audio link as bullet proof as...
View ArticleForum Post: Concentrator radius in zigbee Smart Energy
It is specified in Smart energy profile concentrator radius to be 11. Is it Metres or what?
View ArticleForum Post: How to use Handles in GATT_ReadCharValue
So I am following the TI BLE Stack API with a CC2540 set up as Central/Client and a CC2541 set up as Peripheral/Server (I am using SimpleBLECentral and SimpleBLEPeripheral software examples). In the...
View ArticleForum Post: RE: CC1000 impedance matching network problem
Different component type than the ones stated in the reference design would possible cause a performance degradation not a total loss of signal. If you don't have a signal at all (full span on the...
View ArticleForum Post: Messuring connection quality/stability
Hi.I would like to know what you propose to meassure the quality and stability of a BLE connection.Can we check the number of unsuccessful connection events in the LE stack? Is it possible to check the...
View ArticleForum Post: RE: How to implement group Addressing by using Monitor and Test API.
Dear,Nice to hear it works fine now. In my project，I use RX_ALWAYs_ON for my ZED. It is my suggestion to do so if you want to do group control on ZEDs.
View ArticleForum Post: RE: CC2540 SPI Communication configuration help request
Hi,First of all, the DN112 is what you need to read right now (this document is valid for CC2540 devices too).If you still having problems to configure and make the SPI work, please let me know.There's...
View ArticleForum Post: RE: CC-6LowPAN
Hi, Jonas. I have some further questions on it.If we use our own board, only can CC1180DB be used, but CC430 can not be used, is that right ? If we use CC1180DB nodes with our own host board. What...
View ArticleForum Post: RE: iOS BLE and CC2540 SimpleBLE
Try to use nil as a parameter to find all services not just the one you are looking for. You should find atleast the standard gap and gatt service.
View ArticleForum Post: RE: About TrxEB usb firmware
Hi,My apoligies for the delayed response. The bootloader images you refer to (TrxEB and CC Debugger) are quite similar and both should in fact work.The TrxEB bootloader does configure some more I/O....
View ArticleForum Post: RE: The Router can send its child packets but not its own packet
It's important to say that I have 2 networks on the same channel, and each network have 35 Routers and End Devices mixed. Each device is connected to a serial device sending information, and each...
View ArticleClik here to view.
Forum Post: Posts approved by moderator of a forum
Hi to moderators (I guess),Recently I started to get this messages (attached image) when I'm posting answers inLow Power RF Hardware & Tools Forum and Low Power RF Bluetooth® Low Energy & ANT...
View ArticleForum Post: RE: CC2540 spi slave mode using interrupt
Hi,So did you get this code to work for you? I've been using the CC2540 as an SPI master and it's been working great, but I'm now trying to use it as an SPI slave and am having all sorts of problems....
View ArticleForum Post: CC2543-CC2544 dev kit
I am running the demo and I can't get pass the Mode select screen. Any suggestions?
View ArticleForum Post: RE: re-established a terminated connection
Nick,Thanks for the response. I finally sat down and went through the code attached to your last response. My hardware will probably work attaching and re-attaching to that project because it is not...
View ArticleForum Post: RE: CC2531DK_Dongle and Python
[quote user="BARRY LOVERIDGE"]BTW - I have a Daintree system. Any idea how easy it will be to create a client that can connect to this system? [/quote]Have no a clue.By the way, you can use...
View ArticleForum Post: RE: CC430 169 MHz
CC430 does not cover the 169MHz band. To cover 169MHz you have to use CC1120.
View ArticleForum Post: RE: How can l handle the "NWK link status" message in the...
When R1 disapprear, R2 does not need to "re-associate" to the ZC, so it will never appear in ZC association table. If R2 is within radio range of ZC, it will appear in neighbor table.Why are you even...
View ArticleForum Post: RE: CC1101 + CC1190 with MSP430FG4618/F2013 Experimenter Board...
Hi TER,I tried to hardwired PA_EN and LNA_EN to VDD/GND and it work in this way.Thank you a lot.
View Article
