Wireless Connectivity

Channel: Wireless Connectivity

Forum Post: RE: SLEEP_CODE ERROR Running Linker on IAR 8.10 CC2530 Application

November 16, 2012, 9:27 am

Try this:In hal_sleep.c:/* The instruction after the PCON instruction must not be 4-byte aligned. * The following code may cause excessive power consumption if not properly aligned. * See linker file...

View Article

Forum Post: RE: CC debugger 2540 programming works in smartrf GUI but not...

November 16, 2012, 10:10 am

Thank you for the reply! Our device is 128kB flash size. Our first byte of the info page is 0xBC.

View Article

Forum Post: RE: PeerToPeer connection between TRF7970A evm and Android...

November 16, 2012, 2:24 pm

Is there a way to access the msp430 on the development board so that I can send hex commands or replace the host with a microcontroller?

View Article

Forum Post: MSP430BT5190+CC256x read acceleration with ADC12

November 16, 2012, 2:38 pm

Hi all.I bought the MSP430 eZ430-RF256x evaluation tool. After analyzing the example of pinguin, I commented everything about USB and IC2 (Accel) and add ADC12 reading, to sense the temperature and...

View Article

Forum Post: RE: CC2531DK_Dongle and Python

November 16, 2012, 3:15 pm

Hi,Attached is the precompiled .hex. enjoy (rename the extension from .txt to .hex) :)If you need something, let me know.(Please visit the site to view this file)

View Article

Forum Post: RE: OMAP-L138 + WL1271 is it possible?

November 16, 2012, 5:07 pm

In targetfs/usr/lib:-rwxr-xr-x 1 - - 1813734 Nov 6 14:38 libgettextlib-0.18.solrwxrwxrwx 1 - - 21 Nov 6 14:38 libgettextlib.so -> libgettextlib-0.18.so-rw-r--r-- 1 - - 637458 Nov 6 14:38...

View Article

Forum Post: RE: [Bug report] CC2530ZNP ZB_ALLOW_BIND_CONFIRM packet length error

November 16, 2012, 6:20 pm

This bug has been verified and is scheduled to be fixed in the next Z-Stack release.For now, users can do as Joey suggests: (1) ignore the extraneous 3rd byte that is returned to the host, or (2)...

View Article

Forum Post: RE: I'm seeking a recommendation for a sub 1Ghz protocol with low...

November 16, 2012, 9:37 pm

Hi DIrk,Thank you for the assistance.This is a asset management system, meaning Real Time location system.Two type of sensors 1. Installed static sensors- Perform Scan ruining on electricity(not...

View Article

Forum Post: RE: CC3000 Basic Wi-Fi example application for MSP430

November 16, 2012, 10:50 pm

[quote user="Hsiung Chia-Wei"]Then it shut down on the putty. I can not type any command on the putty.[/quote]This means that there is some problem in sending the data.Is the putty responding after...

View Article

Forum Post: RE: SLEEP_CODE ERROR Running Linker on IAR 8.10 CC2530 Application

November 16, 2012, 10:52 pm

Hi Harry,Thanks for this update, after commenting the "Sleep_code" and addiing the above suggested code I was able to make the code work, however I also need to know that why has this change been made...

View Article

Forum Post: RE: code for configure UART with out Z-stack in cc2530.

November 17, 2012, 3:16 am

Hi,Please refer to DNN113.

View Article

Forum Post: RE: Messuring connection quality/stability

November 17, 2012, 4:25 am

Hi Hermann,If you are using our SoC as a Wireless Network Processor (WNP), you can use the HCI Extension Packet Error Rate command to analyze stability. You can read more in the TI BLE Vendor Specific...

View Article

Forum Post: RE: Sensor Tag LED1 and LED2

November 17, 2012, 4:29 am

Hi Fred,I believe there are no specific services for controlling the LEDs in the initial release of the firmware. You could add that functionality yourself though, once the source code becomes...

View Article

Forum Post: RE: UART Bytes missing with ISR

November 17, 2012, 5:34 am

ahh, this is news to me. Has this been discussed before in the forum or just internal TI knowledge?I've torn this driver apart trying to figure out why i lose bytes on random transmissions.Thanks

View Article

Forum Post: RE: wlan_connect return error

November 17, 2012, 6:58 am

I have WEP works fine. Length of the key for WEP can be 5 or 13 characters long.

View Article

Image may be NSFW.
Clik here to view.

Forum Post: How to make OTA with APS Command Type?

November 17, 2012, 7:46 am

I observed AF_DataRequest OTA by ZigBee Protocal analyser. In APS Layer, APS Frame is "Data type" in APS Frame Control, and consists with Dst_Endpoint, Cluster ID, Profile ID, Src_Endpoint, APS...

View Article