Forum Post: RE: WL1271 in a LSR TiWi-R2 on an IMX28 based board
Hi, Have you succeeded to drive the TIWI-R2? Julien
View ArticleForum Post: RE: AIC3254+CC8530 : Click noise on the microphone input
Hi Bernard, Interesting information - could you also check if latency setting will affect the frequency of the click? Another thing that would be interesting to know is if this disappears if you...
View ArticleForum Post: RE: TiWi Bluetooth Eval tool connectivity Error
Hello Vinod, The LSR tool does not use hardware flow control when using the UART so this could be your problem. If you are running Linux I would recommend using the hcitool in Linux to evaluate the...
View ArticleForum Post: RE: Problem sending data to connected End Device from Coordinator
Hey, my problem looks very similar to yours. Basically I am using DemoApp (from samples) and trying to send data from co-ordinator to sensorEB. I have added out cluster command on coordnator and...
View ArticleForum Post: RE: Possibility to use CC1020 or CC1120 on SimpliciTI net!
Hello, I post here in the hope that someone can finally answer to us... Is there any chance to get MRFI or SimpliciTI ported for the CC1120/CC1125?We plan to use the new CC1125 so i need...
View ArticleForum Post: RE: WL1271 BT Unable to Scan devices
Vinod, TI apps will contact you directly for support. Thanks, Naveen
View ArticleForum Post: RE: Understanding Interrupts used in Host Driver
Hi Jim, You could read more about SSI in the Stellaris data sheet chapter 15: http://www.ti.com/lit/ds/symlink/lm4f232h5qd.pdf The Stellaris® microcontroller includes four Synchronous Serial Interface...
View ArticleForum Post: RE: CC2530 OAD questiions
You can make the image smaller by removing the "code fill" by reducing the size of the available flash space in the linker file. You will also need to change the address range of the CRC calculation in...
View ArticleForum Post: RE: CC2530ZNP. Unknown Status byte value in AF_DATA_CONFIRM command
Sounds like these data requests are to a sleeping end device that does not wake up often enough? #define MAC_TRANSACTION_EXPIRED 0xF0 /* The associate response, disassociate request, or indirect...
View ArticleForum Post: RE: CC1121 - TX Modulated Continuously
Ok, then my assumtion was correct. The correct register settings you find by setting Smart RF Studio as you described (Continuous TX -> Modulated (Modulation Format -> 2GFSK), Data format ->...
View ArticleForum Post: RE: CC3000 Datalogger question
Yes, that is correct, try it and let me know if it worked. Pedro
View ArticleForum Post: RE: CC3000 Problem retreiving SSID with netapp_ipconfig()
Thank you Pedro. I'll wait your answer
View ArticleForum Post: RE: RFID 13.56MHz Antenna using the TRF7960EVM 4W pwr amplifier
Hello Ray, Thanks for this info as it makes more sense to me and just re-confirms my findings. I might go with a multi-layer PCB to kind of mimic the solenoid as much as possible and round my corners....
View ArticleForum Post: RE: CC2541\BLE non volatile RAM (Flash memory) question
I get that. Thanks!
View ArticleForum Post: RE: Can I change packet format in CC1101?
Package length: Option one: Use the first byte as package lenght Option two: Set PKTCTRL0.LENGTH_CONFIG=0x0 and set the package length with the PKTLEN register. Sync: Change SYNC1 and SYNC0 to your...
View ArticleForum Post: RE: balanced RFID antenna
no - the design is intentionally done this way to reduce component count and still have effective match.
View ArticleForum Post: RE: receiver
sir,can u explain that em not generating part i couldnt get it and this is for space grade and i have to calculate link budget so even a slight changes matters a lot so is it not going to be problem...
View ArticleForum Post: Bluetopia SPPLEDemo cannot compile using MSPGCC
Hello, I am trying to compile the SPPLEDemo using MSPGCC and Cygwin, but I have a problem with the library archives. The archive, libBluetopia.a, for instance, contains object files which contain...
View ArticleForum Post: RE: CC2500EMK
Hi Abdur, Which Mac protocol? I need more details to answer. Cheers, Per
View ArticleForum Post: RE: CC2530 ADC offset and gain compensation
thank you for your answer.. I do 20 measure every sampling so I think I hope to reduce the effect of INL. In input I have a regulated supply voltage and I do a test measure from 0 to 2500mV, I use an...
View Article